19×8.5 ET35 Wheels on a 2010 Audi A4

Evidence summary

• Documented builds using 19×8.5: 21
• Documented builds specifically using 19×8.5 ET35: 6
• Axle context: 1 square · 5 staggered · 6 front-only · 0 rear-only · 0 both axles

6 documented 2010 Audi A4 builds in our database use 19×8.5 ET35 wheels. This is observed use — not a fit confirmation.

Compared with OEM

Aftermarket: 19×8.5 ET35

Compared with the OEM 19×8.5 ET43 configuration.

Width: same width

Outer edge 8 mm farther toward fender (more outward poke)

Inner edge 8 mm farther from suspension (more inner clearance)

Geometry is deterministic vs the named OEM baseline. It does not mean the setup fits or will clear.

Tires documented with 19×8.5 ET35

• 245/35R19 — 3 builds
• 235/35R19 — 2 builds

• 245/35R19: -1.1% overall diameter vs selected OEM tire — descriptive only, not a clearance rating.
• 235/35R19: -2.1% overall diameter vs selected OEM tire — descriptive only, not a clearance rating.

Documented tire pairings are not tire recommendations.

Suspension, rubbing, fender, and spacers

Suspension on documented builds

• Not recorded — 6

Reported rubbing

• Rubbing reported: 0
• No rubbing reported: 0
• Not recorded: 6

Fender modifications

• Rolled: 0
• Pulled: 0
• No trimming recorded: 0
• Other trimming label: 0
• Not recorded: 6

Spacer data was not recorded on these exact builds.

Counts are descriptive evidence only — not probabilities or clearance guarantees.

Nearby documented setups

Similar evidence — not the same setup.

• 19×8.5 ET435 builds · nearby offset

Compare this setup with your OEM wheels

Prefills 19×8.5 ET35 on this vehicle in the fitment calculator.

Open fitment calculator

Related specs

• Bolt pattern: 5x112
• Center bore: 66.6 mm
• Thread: M14 x 1.5
• All documented 19×8.5 offsets for this year
• 2010 Audi A4 OEM wheel fitment

Size and offset evidence does not replace bolt pattern, hub bore, or thread requirements.