
19×8.5 ET35
Documented Modified1 build
VMR V710
Tire: 245/35R19
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
16 documented builds specifically using ET35
Show evidence for this exact wheel size and offset on my vehicle/year. Exact size+offset builds are observational evidence only — not a universal fit, not the “correct” offset, and not a no-rub guarantee.
16 documented 2011 Audi A4 builds in our database use 19×8.5 ET35 wheels. This is observed use — not a fit confirmation.
Aftermarket: 19×8.5 ET35
Compared with the OEM 19×8.5 ET43 configuration.
Width: same width
Outer edge 8 mm farther toward fender (more outward poke)
Inner edge 8 mm farther from suspension (more inner clearance)
Geometry is deterministic vs the named OEM baseline. It does not mean the setup fits or will clear.
Documented tire pairings are not tire recommendations.
Spacer data was not recorded on these exact builds.
Counts are descriptive evidence only — not probabilities or clearance guarantees.
Showing 16 of 16 builds matching 19×8.5 ET35.

Documented Modified1 build
VMR V710
Tire: 245/35R19

Documented Modified1 build
BBS CK
Tire: 235/35R19

Documented Modified1 build
Hartmann Rotor
Tire: 255/35R19

Documented Modified1 build
VMR V710
Tire: 245/35R19

Documented Modified1 build
Klutch KM20
Rear: 19×10 ET42
Tire: 235/35R19

Documented Modified1 build
OEM Audi A7
Tire: 255/35R19

Documented Modified1 build
Team Dynamics Imola
Tire: 245/35R19

Documented Modified1 build
Klutch KM20
Rear: 19×10 ET42
Tire: 235/35R19

Documented Modified1 build
VMR V710
Tire: 245/35R19

Documented Modified1 build
MTM Bimoto
Tire: 245/35R19

Documented Modified1 build
VMR V701
Tire: 255/35R19

Documented Modified1 build
BBS CH

Documented Modified1 build
Rear: 19×10 ET35

Documented Modified1 build
VMR V718
Tire: 245/35R19

Documented Modified1 build
BBS CK

Documented Modified1 build
VMR 718
Tire: 235/35R19
Similar evidence — not the same setup.
Prefills 19×8.5 ET35 on this vehicle in the fitment calculator.
Size and offset evidence does not replace bolt pattern, hub bore, or thread requirements.