18×7.5 ET42 Wheels on a 2013 Dodge Dart

Evidence summary

• Documented builds using 18×7.5: 3
• Documented builds specifically using 18×7.5 ET42: 3
• Axle context: 0 square · 3 staggered · 3 front-only · 0 rear-only · 0 both axles

3 documented 2013 Dodge Dart builds in our database use 18×7.5 ET42 wheels. This is observed use — not a fit confirmation.

Compared with OEM

Aftermarket: 18×7.5 ET42

Compared with the OEM 18×7.5 ET42 configuration.

Width: same width

Outer position unchanged

Inner position unchanged

Geometry is deterministic vs the named OEM baseline. It does not mean the setup fits or will clear.

Tires documented with 18×7.5 ET42

• 225/40R18 — 1 build

• 225/40R18: +0.0% overall diameter vs selected OEM tire — descriptive only, not a clearance rating.

Documented tire pairings are not tire recommendations.

Suspension, rubbing, fender, and spacers

Suspension on documented builds

• Not recorded — 3

Reported rubbing

• Rubbing reported: 0
• No rubbing reported: 0
• Not recorded: 3

Fender modifications

• Rolled: 0
• Pulled: 0
• No trimming recorded: 0
• Other trimming label: 0
• Not recorded: 3

Spacer data was not recorded on these exact builds.

Counts are descriptive evidence only — not probabilities or clearance guarantees.

Compare this setup with your OEM wheels

Prefills 18×7.5 ET42 on this vehicle in the fitment calculator.

Open fitment calculator

Related specs

• Bolt pattern: 5x110
• Center bore: 65.1 mm
• Thread: M12 x 1.25
• All documented 18×7.5 offsets for this year
• 2013 Dodge Dart OEM wheel fitment

Size and offset evidence does not replace bolt pattern, hub bore, or thread requirements.