18×9.5 ET35 Wheels on a 2008 Honda Accord

Evidence summary

• Documented builds using 18×9.5: 3
• Documented builds specifically using 18×9.5 ET35: 3
• Axle context: 0 square · 3 staggered · 0 front-only · 3 rear-only · 0 both axles

3 documented 2008 Honda Accord builds in our database use 18×9.5 ET35 wheels. This is observed use — not a fit confirmation.

Compared with OEM

Aftermarket: 18×9.5 ET35

Compared with the OEM 18×7 ET50 configuration.

Width: +2.5 in

Outer edge 46.8 mm farther toward fender (more outward poke)

Inner edge 16.8 mm closer to suspension (less inner clearance)

Geometry is deterministic vs the named OEM baseline. It does not mean the setup fits or will clear.

Tires documented with 18×9.5 ET35

• 245/35R18 — 1 build

• 245/35R18: -3.4% overall diameter vs selected OEM tire — descriptive only, not a clearance rating.

Documented tire pairings are not tire recommendations.

Suspension, rubbing, fender, and spacers

Suspension on documented builds

• Not recorded — 3

Reported rubbing

• Rubbing reported: 0
• No rubbing reported: 0
• Not recorded: 3

Fender modifications

• Rolled: 0
• Pulled: 0
• No trimming recorded: 0
• Other trimming label: 0
• Not recorded: 3

Spacer data was not recorded on these exact builds.

Counts are descriptive evidence only — not probabilities or clearance guarantees.

Compare this setup with your OEM wheels

Prefills 18×9.5 ET35 on this vehicle in the fitment calculator.

Open fitment calculator

Related specs

• Bolt pattern: 5x114.3
• Center bore: 64.1 mm
• Thread: M12 x 1.5
• All documented 18×9.5 offsets for this year
• 2008 Honda Accord OEM wheel fitment

Size and offset evidence does not replace bolt pattern, hub bore, or thread requirements.