17×9 ET22 Wheels on a 2010 Honda Civic

Evidence summary

• Documented builds using 17×9: 11
• Documented builds specifically using 17×9 ET22: 3
• Axle context: 0 square · 3 staggered · 2 front-only · 1 rear-only · 0 both axles

3 documented 2010 Honda Civic builds in our database use 17×9 ET22 wheels. This is observed use — not a fit confirmation.

Compared with OEM

Aftermarket: 17×9 ET22

Compared with the OEM 17×7 ET45 configuration.

Width: +2 in

Outer edge 48.4 mm farther toward fender (more outward poke)

Inner edge 2.4 mm closer to suspension (less inner clearance)

Geometry is deterministic vs the named OEM baseline. It does not mean the setup fits or will clear.

Tires documented with 17×9 ET22

• 215/40R17 — 1 build

• 215/40R17: -3.4% overall diameter vs selected OEM tire — descriptive only, not a clearance rating.

Documented tire pairings are not tire recommendations.

Suspension, rubbing, fender, and spacers

Suspension on documented builds

• Not recorded — 3

Reported rubbing

• Rubbing reported: 0
• No rubbing reported: 0
• Not recorded: 3

Fender modifications

• Rolled: 0
• Pulled: 0
• No trimming recorded: 0
• Other trimming label: 0
• Not recorded: 3

Spacer data was not recorded on these exact builds.

Counts are descriptive evidence only — not probabilities or clearance guarantees.

Compare this setup with your OEM wheels

Prefills 17×9 ET22 on this vehicle in the fitment calculator.

Open fitment calculator

Related specs

• Bolt pattern: 5x114.3
• Center bore: 64.1 mm
• Thread: M12 x 1.5
• All documented 17×9 offsets for this year
• 2010 Honda Civic OEM wheel fitment

Size and offset evidence does not replace bolt pattern, hub bore, or thread requirements.