19×10.5 ET15 Wheels on a 2010 Hyundai Genesis Coupe

Evidence summary

• Documented builds using 19×10.5: 32
• Documented builds specifically using 19×10.5 ET15: 3
• Axle context: 0 square · 3 staggered · 0 front-only · 3 rear-only · 0 both axles

3 documented 2010 Hyundai Genesis Coupe builds in our database use 19×10.5 ET15 wheels. This is observed use — not a fit confirmation.

Tires documented with 19×10.5 ET15

• 245/35R19 — 1 build
• 255/35R19 — 1 build

Documented tire pairings are not tire recommendations.

Suspension, rubbing, fender, and spacers

Suspension on documented builds

• Not recorded — 3

Reported rubbing

• Rubbing reported: 0
• No rubbing reported: 0
• Not recorded: 3

Fender modifications

• Rolled: 0
• Pulled: 0
• No trimming recorded: 0
• Other trimming label: 0
• Not recorded: 3

Spacer data was not recorded on these exact builds.

Counts are descriptive evidence only — not probabilities or clearance guarantees.

Nearby documented setups

Similar evidence — not the same setup.

• 19×10.5 ET126 builds · nearby offset
• 19×10.5 ET183 builds · nearby offset
• 19×10.5 ET229 builds · nearby offset
• 19×10.5 ET273 builds · nearby offset
• 19×11 ET185 builds · similar size
• 19×10 ET204 builds · similar size

Compare this setup with your OEM wheels

Prefills 19×10.5 ET15 on this vehicle in the fitment calculator.

Open fitment calculator

Related specs

• Bolt pattern: 5x114.3
• Center bore: 67.1 mm
• Thread: M12 x 1.5
• All documented 19×10.5 offsets for this year
• 2010 Hyundai Genesis Coupe OEM wheel fitment

Size and offset evidence does not replace bolt pattern, hub bore, or thread requirements.