WheelOffset

19×8.5 ET30 Wheels on a 2010 Hyundai Genesis Coupe

3 documented builds specifically using ET30

Show evidence for this exact wheel size and offset on my vehicle/year. Exact size+offset builds are observational evidence only — not a universal fit, not the “correct” offset, and not a no-rub guarantee.

Evidence summary

  • Documented builds using 19×8.5: 19
  • Documented builds specifically using 19×8.5 ET30: 3
  • Axle context: 0 square · 3 staggered · 3 front-only · 0 rear-only · 0 both axles

3 documented 2010 Hyundai Genesis Coupe builds in our database use 19×8.5 ET30 wheels. This is observed use — not a fit confirmation.

Tires documented with 19×8.5 ET30

  • 245/35R19 — 3 builds

Documented tire pairings are not tire recommendations.

Suspension, rubbing, fender, and spacers

Suspension on documented builds

  • Not recorded — 3

Reported rubbing

  • Rubbing reported: 0
  • No rubbing reported: 0
  • Not recorded: 3

Fender modifications

  • Rolled: 0
  • Pulled: 0
  • No trimming recorded: 0
  • Other trimming label: 0
  • Not recorded: 3

Spacer data was not recorded on these exact builds.

Counts are descriptive evidence only — not probabilities or clearance guarantees.

Exact documented builds

Showing 3 of 3 builds matching 19×8.5 ET30.

19×8.5 ET30

Documented Modified1 build

Rear: 19×9.5 ET22

Tire: 245/35R19

Suspension
Not recorded
Rubbing
Not reported
Fender
Not recorded

View documented build

19×8.5 ET30

Documented Modified1 build

Rear: 19×10 ET35

Tire: 245/35R19

Suspension
Not recorded
Rubbing
Not reported
Fender
Not recorded

View documented build

19×8.5 ET30

Documented Modified1 build

Linea Corse LC818

Rear: 19×10 ET38

Tire: 245/35R19

Suspension
Not recorded
Rubbing
Not reported
Fender
Not recorded

View documented build

Nearby documented setups

Similar evidence — not the same setup.

Compare this setup with your OEM wheels

Prefills 19×8.5 ET30 on this vehicle in the fitment calculator.

Open fitment calculator

Related specs

Size and offset evidence does not replace bolt pattern, hub bore, or thread requirements.