20×9 ET30
Documented Modified1 build
Venaci Mesh
Rear: 20×10 ET25
Tire: 245/35R20
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
20×10 ET25 Wheels on a 2010 Hyundai Genesis Coupe
4 documented builds specifically using ET25
Show evidence for this exact wheel size and offset on my vehicle/year. Exact size+offset builds are observational evidence only — not a universal fit, not the “correct” offset, and not a no-rub guarantee.
Evidence summary
- Documented builds using 20×10: 7
- Documented builds specifically using 20×10 ET25: 4
- Axle context: 0 square · 4 staggered · 0 front-only · 4 rear-only · 0 both axles
4 documented 2010 Hyundai Genesis Coupe builds in our database use 20×10 ET25 wheels. This is observed use — not a fit confirmation.
Tires documented with 20×10 ET25
- 285/30R20 — 2 builds
- 255/35R20 — 1 build
- 295/30R20 — 1 build
Documented tire pairings are not tire recommendations.
Suspension, rubbing, fender, and spacers
Suspension on documented builds
- Not recorded — 4
Reported rubbing
- Rubbing reported: 0
- No rubbing reported: 0
- Not recorded: 4
Fender modifications
- Rolled: 0
- Pulled: 0
- No trimming recorded: 0
- Other trimming label: 0
- Not recorded: 4
Spacer data was not recorded on these exact builds.
Counts are descriptive evidence only — not probabilities or clearance guarantees.
Exact documented builds
Showing 4 of 4 builds matching 20×10 ET25.
20×9 ET30
Documented Modified1 build
Venaci Mesh
Rear: 20×10 ET25
Tire: 245/35R20
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
20×8.5 ET20
Documented Modified1 build
Rear: 20×10 ET25
Tire: 265/30R20
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
20×8.5 ET20
Documented Modified1 build
Rear: 20×10 ET25
Tire: 225/35R20
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
Nearby documented setups
Similar evidence — not the same setup.
Compare this setup with your OEM wheels
Prefills 20×10 ET25 on this vehicle in the fitment calculator.
Related specs
- Bolt pattern: 5x114.3
- Center bore: 67.1 mm
- Thread: M12 x 1.5
- All documented 20×10 offsets for this year
- 2010 Hyundai Genesis Coupe OEM wheel fitment
Size and offset evidence does not replace bolt pattern, hub bore, or thread requirements.