19×9.5 ET12
Documented Modified1 build
Full Polish
Rear: 19×10.5 ET12
Tire: 225/40R19
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
19×10.5 ET12 Wheels on a 2010 Hyundai Genesis
4 documented builds specifically using ET12
Show evidence for this exact wheel size and offset on my vehicle/year. Exact size+offset builds are observational evidence only — not a universal fit, not the “correct” offset, and not a no-rub guarantee.
Evidence summary
- Documented builds using 19×10.5: 10
- Documented builds specifically using 19×10.5 ET12: 4
- Axle context: 0 square · 4 staggered · 0 front-only · 4 rear-only · 0 both axles
4 documented 2010 Hyundai Genesis builds in our database use 19×10.5 ET12 wheels. This is observed use — not a fit confirmation.
Compared with OEM
Aftermarket: 19×10.5 ET12
Compared with the OEM 18×7.5 ET33 configuration.
Width: +3 in
Outer edge 59.1 mm farther toward fender (more outward poke)
Inner edge 17.1 mm closer to suspension (less inner clearance)
Geometry is deterministic vs the named OEM baseline. It does not mean the setup fits or will clear.
Tires documented with 19×10.5 ET12
- 245/40R19 — 4 builds
- 245/40R19: -2.0% overall diameter vs selected OEM tire — descriptive only, not a clearance rating.
Documented tire pairings are not tire recommendations.
Suspension, rubbing, fender, and spacers
Suspension on documented builds
- Not recorded — 4
Reported rubbing
- Rubbing reported: 0
- No rubbing reported: 0
- Not recorded: 4
Fender modifications
- Rolled: 0
- Pulled: 0
- No trimming recorded: 0
- Other trimming label: 0
- Not recorded: 4
Spacer data was not recorded on these exact builds.
Counts are descriptive evidence only — not probabilities or clearance guarantees.
Exact documented builds
Showing 4 of 4 builds matching 19×10.5 ET12.
19×9.5 ET12
Documented Modified1 build
Rear: 19×10.5 ET12
Tire: 225/40R19
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
19×9.5 ET12
Documented Modified1 build
VarrsToen ES 2.2.2
Rear: 19×10.5 ET12
Tire: 225/40R19
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
19×9.5
Documented Modified1 build
Varrstoen
Rear: 19×10.5 ET12
Tire: 225/40R19
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
Nearby documented setups
Similar evidence — not the same setup.
Compare this setup with your OEM wheels
Prefills 19×10.5 ET12 on this vehicle in the fitment calculator.
Related specs
- Bolt pattern: 5x114.3
- Center bore: 67.1 mm
- Thread: M12 x 1.5
- All documented 19×10.5 offsets for this year
- 2010 Hyundai Genesis OEM wheel fitment
Size and offset evidence does not replace bolt pattern, hub bore, or thread requirements.