19×8.5 ET32
Documented Modified1 build
Element 114
Rear: 19×10 ET48
Tire: 225/35R19
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
19×8.5 ET32 Wheels on a 2006 Lexus IS 250
3 documented builds specifically using ET32
Show evidence for this exact wheel size and offset on my vehicle/year. Exact size+offset builds are observational evidence only — not a universal fit, not the “correct” offset, and not a no-rub guarantee.
Evidence summary
- Documented builds using 19×8.5: 38
- Documented builds specifically using 19×8.5 ET32: 3
- Axle context: 0 square · 3 staggered · 2 front-only · 1 rear-only · 0 both axles
3 documented 2006 Lexus IS 250 builds in our database use 19×8.5 ET32 wheels. This is observed use — not a fit confirmation.
Tires documented with 19×8.5 ET32
- 225/35R19 — 2 builds
- 245/35R19 — 1 build
Documented tire pairings are not tire recommendations.
Suspension, rubbing, fender, and spacers
Suspension on documented builds
- Not recorded — 3
Reported rubbing
- Rubbing reported: 0
- No rubbing reported: 0
- Not recorded: 3
Fender modifications
- Rolled: 0
- Pulled: 0
- No trimming recorded: 0
- Other trimming label: 0
- Not recorded: 3
Spacer data was not recorded on these exact builds.
Counts are descriptive evidence only — not probabilities or clearance guarantees.
Exact documented builds
Showing 3 of 3 builds matching 19×8.5 ET32.
19×9.5 ET36
Documented Modified1 build
Volk GT-7's
Rear: 19×8.5 ET32
Tire: 275/30R19
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
19×8.5 ET32
Documented Modified1 build
Element 114
Rear: 19×10 ET48
Tire: 225/35R19
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
Nearby documented setups
Similar evidence — not the same setup.
Compare this setup with your OEM wheels
Prefills 19×8.5 ET32 on this vehicle in the fitment calculator.
Related specs
- Bolt pattern: 5x114.3
- Center bore: 60.1 mm
- Thread: M12 x 1.5
- All documented 19×8.5 offsets for this year
- 2006 Lexus IS 250 OEM wheel fitment
Size and offset evidence does not replace bolt pattern, hub bore, or thread requirements.