19×9.5 ET50 Wheels on a 2010 Mercedes-Benz C-Class

Evidence summary

• Documented builds using 19×9.5: 14
• Documented builds specifically using 19×9.5 ET50: 5
• Axle context: 0 square · 5 staggered · 0 front-only · 5 rear-only · 0 both axles

5 documented 2010 Mercedes-Benz C-Class builds in our database use 19×9.5 ET50 wheels. This is observed use — not a fit confirmation.

Compared with OEM

Aftermarket: 19×9.5 ET50

Compared with the OEM 19×7.5 ET50 configuration.

Width: +2 in

Outer edge 25.4 mm farther toward fender (more outward poke)

Inner edge 25.4 mm closer to suspension (less inner clearance)

Geometry is deterministic vs the named OEM baseline. It does not mean the setup fits or will clear.

Tires documented with 19×9.5 ET50

• 275/30R19 — 2 builds

• 275/30R19: -7.2% overall diameter vs selected OEM tire — descriptive only, not a clearance rating.

Documented tire pairings are not tire recommendations.

Suspension, rubbing, fender, and spacers

Suspension on documented builds

• Not recorded — 5

Reported rubbing

• Rubbing reported: 0
• No rubbing reported: 0
• Not recorded: 5

Fender modifications

• Rolled: 0
• Pulled: 0
• No trimming recorded: 0
• Other trimming label: 0
• Not recorded: 5

Spacer data was not recorded on these exact builds.

Counts are descriptive evidence only — not probabilities or clearance guarantees.

Nearby documented setups

Similar evidence — not the same setup.

• 19×9.5 ET484 builds · nearby offset

Compare this setup with your OEM wheels

Prefills 19×9.5 ET50 on this vehicle in the fitment calculator.

Open fitment calculator

Related specs

• Bolt pattern: 5x112
• Center bore: 66.6 mm
• Thread: M14 x 1.5
• All documented 19×9.5 offsets for this year
• 2010 Mercedes-Benz C-Class OEM wheel fitment

Size and offset evidence does not replace bolt pattern, hub bore, or thread requirements.