
18×9.5 ET22
Documented Modified1 build
Volk TE37
Tire: 245/40R18
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
14 documented builds specifically using ET22
Show evidence for this exact wheel size and offset on my vehicle/year. Exact size+offset builds are observational evidence only — not a universal fit, not the “correct” offset, and not a no-rub guarantee.
14 documented 2008 Mitsubishi Lancer Evolution builds in our database use 18×9.5 ET22 wheels. This is observed use — not a fit confirmation.
Aftermarket: 18×9.5 ET22
Compared with the OEM 18×8.5 ET38 configuration.
Width: +1 in
Outer edge 28.7 mm farther toward fender (more outward poke)
Inner edge 3.3 mm farther from suspension (more inner clearance)
Geometry is deterministic vs the named OEM baseline. It does not mean the setup fits or will clear.
Documented tire pairings are not tire recommendations.
Spacer data was not recorded on these exact builds.
Counts are descriptive evidence only — not probabilities or clearance guarantees.
Showing 14 of 14 builds matching 18×9.5 ET22.

Documented Modified1 build
Volk TE37
Tire: 245/40R18

Documented Modified1 build
Rays Engineering Gram Lights 57 Optimise
Tire: 255/35R18

Documented Modified1 build
Rays Engineering Volk Racing TE37
Tire: 275/35R18

Documented Modified1 build
Rays Volk TE37SL
Tire: 235/40R18

Documented Modified1 build
Volk TE37
Tire: 255/35R18

Documented Modified1 build
Gram Light 57D
Tire: 255/35R18

Documented Modified1 build
Gram Light 57Optimise
Tire: 255/35R18

Documented Modified1 build
Gram Lights 57Maximum
Rear: 18×9.5 ET38
Tire: 265/35R18

Documented Modified1 build
Rays Engineering Volk Racing TE37
Tire: 275/35R18

Documented Modified1 build

Documented Modified1 build
Tire: 255/35R18

Documented Modified1 build
Gram Light 57 Maximum

Documented Modified1 build
Volk TE37
Tire: 245/40R18

Documented Modified1 build
Gram Lights Optimize Wheels
Tire: 265/35R18
Similar evidence — not the same setup.
Prefills 18×9.5 ET22 on this vehicle in the fitment calculator.
Size and offset evidence does not replace bolt pattern, hub bore, or thread requirements.