19×9 ET20
Documented Modified1 build
Rota Spectrum
Rear: 19×10 ET20
Tire: 255/35R19
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
19×10 ET20 Wheels on a 2005 Nissan 350Z
4 documented builds specifically using ET20
Show evidence for this exact wheel size and offset on my vehicle/year. Exact size+offset builds are observational evidence only — not a universal fit, not the “correct” offset, and not a no-rub guarantee.
Evidence summary
- Documented builds using 19×10: 7
- Documented builds specifically using 19×10 ET20: 4
- Axle context: 0 square · 4 staggered · 1 front-only · 3 rear-only · 0 both axles
4 documented 2005 Nissan 350Z builds in our database use 19×10 ET20 wheels. This is observed use — not a fit confirmation.
Tires documented with 19×10 ET20
- 285/35R19 — 1 build
Documented tire pairings are not tire recommendations.
Suspension, rubbing, fender, and spacers
Suspension on documented builds
- Not recorded — 4
Reported rubbing
- Rubbing reported: 0
- No rubbing reported: 0
- Not recorded: 4
Fender modifications
- Rolled: 0
- Pulled: 0
- No trimming recorded: 0
- Other trimming label: 0
- Not recorded: 4
Spacer data was not recorded on these exact builds.
Counts are descriptive evidence only — not probabilities or clearance guarantees.
Exact documented builds
Showing 4 of 4 builds matching 19×10 ET20.
19×9 ET20
Documented Modified1 build
Rota P45
Rear: 19×10 ET20
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
19×8.5 ET15
Documented Modified1 build
Linea Corse Dyna
Rear: 19×10 ET20
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
19×10 ET20
Documented Modified1 build
Rota Spectrum
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
Compare this setup with your OEM wheels
Prefills 19×10 ET20 on this vehicle in the fitment calculator.
Related specs
- Bolt pattern: 5x114.3
- Center bore: 66.1 mm
- Thread: M12 x 1.25
- All documented 19×10 offsets for this year
- 2005 Nissan 350Z OEM wheel fitment
Size and offset evidence does not replace bolt pattern, hub bore, or thread requirements.