17×7 ET40 Wheels on a 2013 Scion FR-S

Evidence summary

• Documented builds using 17×7: 21
• Documented builds specifically using 17×7 ET40: 6
• Axle context: 0 square · 6 staggered · 6 front-only · 0 rear-only · 0 both axles

6 documented 2013 Scion FR-S builds in our database use 17×7 ET40 wheels. This is observed use — not a fit confirmation.

Compared with OEM

Aftermarket: 17×7 ET40

Compared with the OEM 17×7 ET48 configuration.

Width: same width

Outer edge 8 mm farther toward fender (more outward poke)

Inner edge 8 mm farther from suspension (more inner clearance)

Geometry is deterministic vs the named OEM baseline. It does not mean the setup fits or will clear.

Tires documented with 17×7 ET40

• 215/45R17 — 2 builds

• 215/45R17: +0.0% overall diameter vs selected OEM tire — descriptive only, not a clearance rating.

Documented tire pairings are not tire recommendations.

Suspension, rubbing, fender, and spacers

Suspension on documented builds

• Not recorded — 6

Reported rubbing

• Rubbing reported: 0
• No rubbing reported: 0
• Not recorded: 6

Fender modifications

• Rolled: 0
• Pulled: 0
• No trimming recorded: 0
• Other trimming label: 0
• Not recorded: 6

Spacer data was not recorded on these exact builds.

Counts are descriptive evidence only — not probabilities or clearance guarantees.

Nearby documented setups

Similar evidence — not the same setup.

• 17×7 ET486 builds · nearby offset
• 17×7.5 ET454 builds · similar size
• 17×7.5 ET353 builds · similar size

Compare this setup with your OEM wheels

Prefills 17×7 ET40 on this vehicle in the fitment calculator.

Open fitment calculator

Related specs

• Bolt pattern: 5x100
• Center bore: 56.1 mm
• Thread: M12 x 1.25
• All documented 17×7 offsets for this year
• 2013 Scion FR-S OEM wheel fitment

Size and offset evidence does not replace bolt pattern, hub bore, or thread requirements.