17×9 ET40 Wheels on a 2013 Scion FR-S

Evidence summary

• Documented builds using 17×9: 51
• Documented builds specifically using 17×9 ET40: 3
• Axle context: 0 square · 3 staggered · 3 front-only · 0 rear-only · 0 both axles

3 documented 2013 Scion FR-S builds in our database use 17×9 ET40 wheels. This is observed use — not a fit confirmation.

Compared with OEM

Aftermarket: 17×9 ET40

Compared with the OEM 17×7 ET48 configuration.

Width: +2 in

Outer edge 33.4 mm farther toward fender (more outward poke)

Inner edge 17.4 mm closer to suspension (less inner clearance)

Geometry is deterministic vs the named OEM baseline. It does not mean the setup fits or will clear.

Tires documented with 17×9 ET40

• 245/40R17 — 2 builds

• 245/40R17: +0.4% overall diameter vs selected OEM tire — descriptive only, not a clearance rating.

Documented tire pairings are not tire recommendations.

Suspension, rubbing, fender, and spacers

Suspension on documented builds

• Not recorded — 3

Reported rubbing

• Rubbing reported: 0
• No rubbing reported: 0
• Not recorded: 3

Fender modifications

• Rolled: 0
• Pulled: 0
• No trimming recorded: 0
• Other trimming label: 0
• Not recorded: 3

Spacer data was not recorded on these exact builds.

Counts are descriptive evidence only — not probabilities or clearance guarantees.

Nearby documented setups

Similar evidence — not the same setup.

• 17×9 ET385 builds · nearby offset
• 17×9 ET424 builds · nearby offset
• 17×9 ET3524 builds · nearby offset
• 17×9 ET454 builds · nearby offset
• 17×9 ET304 builds · nearby offset

Compare this setup with your OEM wheels

Prefills 17×9 ET40 on this vehicle in the fitment calculator.

Open fitment calculator

Related specs

• Bolt pattern: 5x100
• Center bore: 56.1 mm
• Thread: M12 x 1.25
• All documented 17×9 offsets for this year
• 2013 Scion FR-S OEM wheel fitment

Size and offset evidence does not replace bolt pattern, hub bore, or thread requirements.