17×7 ET42
Documented Modified1 build
Enkei RPF1
Tire: 225/45R17
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
17×7 ET42 Wheels on a 2013 Subaru BRZ
4 documented builds specifically using ET42
Show evidence for this exact wheel size and offset on my vehicle/year. Exact size+offset builds are observational evidence only — not a universal fit, not the “correct” offset, and not a no-rub guarantee.
Evidence summary
- Documented builds using 17×7: 15
- Documented builds specifically using 17×7 ET42: 4
- Axle context: 0 square · 4 staggered · 4 front-only · 0 rear-only · 0 both axles
4 documented 2013 Subaru BRZ builds in our database use 17×7 ET42 wheels. This is observed use — not a fit confirmation.
Compared with OEM
Aftermarket: 17×7 ET42
Compared with the OEM 17×7 ET48 configuration.
Width: same width
Outer edge 6 mm farther toward fender (more outward poke)
Inner edge 6 mm farther from suspension (more inner clearance)
Geometry is deterministic vs the named OEM baseline. It does not mean the setup fits or will clear.
Tires documented with 17×7 ET42
- 225/45R17 — 2 builds
- 225/45R17: +1.4% overall diameter vs selected OEM tire — descriptive only, not a clearance rating.
Documented tire pairings are not tire recommendations.
Suspension, rubbing, fender, and spacers
Suspension on documented builds
- Not recorded — 4
Reported rubbing
- Rubbing reported: 0
- No rubbing reported: 0
- Not recorded: 4
Fender modifications
- Rolled: 0
- Pulled: 0
- No trimming recorded: 0
- Other trimming label: 0
- Not recorded: 4
Spacer data was not recorded on these exact builds.
Counts are descriptive evidence only — not probabilities or clearance guarantees.
Exact documented builds
Showing 4 of 4 builds matching 17×7 ET42.
17×7 ET42
Documented Modified1 build
Tenzo DC-5
Tire: 225/45R17
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
17×7 ET42
Documented Modified1 build
PIAA Eco Premium S-12
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
17×7 ET42
Documented Modified1 build
Motegi MR221 Traklite
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
Nearby documented setups
Similar evidence — not the same setup.
Compare this setup with your OEM wheels
Prefills 17×7 ET42 on this vehicle in the fitment calculator.
Related specs
- Bolt pattern: 5x100
- Center bore: 56.1 mm
- Thread: M12 x 1.25
- All documented 17×7 offsets for this year
- 2013 Subaru BRZ OEM wheel fitment
Size and offset evidence does not replace bolt pattern, hub bore, or thread requirements.