19×9.5 ET38 Wheels on a 2013 Subaru BRZ

Evidence summary

• Documented builds using 19×9.5: 8
• Documented builds specifically using 19×9.5 ET38: 3
• Axle context: 0 square · 3 staggered · 1 front-only · 2 rear-only · 0 both axles

3 documented 2013 Subaru BRZ builds in our database use 19×9.5 ET38 wheels. This is observed use — not a fit confirmation.

Compared with OEM

Aftermarket: 19×9.5 ET38

Compared with the OEM 18×7.5 ET48 configuration.

Width: +2 in

Outer edge 35.4 mm farther toward fender (more outward poke)

Inner edge 15.4 mm closer to suspension (less inner clearance)

Geometry is deterministic vs the named OEM baseline. It does not mean the setup fits or will clear.

Tires documented with 19×9.5 ET38

• 225/40R19 — 1 build
• 255/35R19 — 1 build

• 225/40R19: +4.0% overall diameter vs selected OEM tire — descriptive only, not a clearance rating.
• 255/35R19: +3.8% overall diameter vs selected OEM tire — descriptive only, not a clearance rating.

Documented tire pairings are not tire recommendations.

Suspension, rubbing, fender, and spacers

Suspension on documented builds

• Not recorded — 3

Reported rubbing

• Rubbing reported: 0
• No rubbing reported: 0
• Not recorded: 3

Fender modifications

• Rolled: 0
• Pulled: 0
• No trimming recorded: 0
• Other trimming label: 0
• Not recorded: 3

Spacer data was not recorded on these exact builds.

Counts are descriptive evidence only — not probabilities or clearance guarantees.

Compare this setup with your OEM wheels

Prefills 19×9.5 ET38 on this vehicle in the fitment calculator.

Open fitment calculator

Related specs

• Bolt pattern: 5x100
• Center bore: 56.1 mm
• Thread: M12 x 1.25
• All documented 19×9.5 offsets for this year
• 2013 Subaru BRZ OEM wheel fitment

Size and offset evidence does not replace bolt pattern, hub bore, or thread requirements.