18×9 ET35
Documented Modified1 build
Rota G-Force
Tire: 225/40R18
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
18×9 ET35 Wheels on a 2004 Subaru Impreza WRX STi
3 documented builds specifically using ET35
Show evidence for this exact wheel size and offset on my vehicle/year. Exact size+offset builds are observational evidence only — not a universal fit, not the “correct” offset, and not a no-rub guarantee.
Evidence summary
- Documented builds using 18×9: 3
- Documented builds specifically using 18×9 ET35: 3
- Axle context: 0 square · 3 staggered · 2 front-only · 1 rear-only · 0 both axles
3 documented 2004 Subaru Impreza WRX STi builds in our database use 18×9 ET35 wheels. This is observed use — not a fit confirmation.
Tires documented with 18×9 ET35
- 225/40R18 — 1 build
- 235/40R18 — 1 build
Documented tire pairings are not tire recommendations.
Suspension, rubbing, fender, and spacers
Suspension on documented builds
- Not recorded — 3
Reported rubbing
- Rubbing reported: 0
- No rubbing reported: 0
- Not recorded: 3
Fender modifications
- Rolled: 0
- Pulled: 0
- No trimming recorded: 0
- Other trimming label: 0
- Not recorded: 3
Spacer data was not recorded on these exact builds.
Counts are descriptive evidence only — not probabilities or clearance guarantees.
Exact documented builds
Showing 3 of 3 builds matching 18×9 ET35.
18×9 ET35
Documented Modified1 build
Rota G-Force
Tire: 235/40R18
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
18×9 ET30
Documented Modified1 build
RoJa Formula 5
Rear: 18×9 ET35
Tire: 255/35R18
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
Nearby documented setups
Similar evidence — not the same setup.
Compare this setup with your OEM wheels
Prefills 18×9 ET35 on this vehicle in the fitment calculator.
Related specs
- Bolt pattern: 5x100
- Center bore: 56.1 mm
- Thread: M12 x 1.25
- All documented 18×9 offsets for this year
- 2004 Subaru Impreza WRX STi OEM wheel fitment
Size and offset evidence does not replace bolt pattern, hub bore, or thread requirements.