20×10.5 ET25 Wheels on a 2016 Audi SQ5

Evidence summary

• Documented builds using 20×10.5: 21
• Documented builds specifically using 20×10.5 ET25: 10
• Axle context: 9 square · 1 staggered · 9 front-only · 1 rear-only · 0 both axles

10 documented 2016 Audi SQ5 builds in our database use 20×10.5 ET25 wheels. This is observed use — not a fit confirmation.

Compared with OEM

Aftermarket: 20×10.5 ET25

Compared with the OEM 20×8.5 ET33 configuration.

Width: +2 in

Outer edge 33.4 mm farther toward fender (more outward poke)

Inner edge 17.4 mm closer to suspension (less inner clearance)

Geometry is deterministic vs the named OEM baseline. It does not mean the setup fits or will clear.

Tires documented with 20×10.5 ET25

• 295/40R20 — 9 builds

• 295/40R20: +0.9% overall diameter vs selected OEM tire — descriptive only, not a clearance rating.

Documented tire pairings are not tire recommendations.

Suspension, rubbing, fender, and spacers

Suspension on documented builds

• Not recorded — 9
• Lowered Adj Coil Overs — 1

Reported rubbing

• Rubbing reported: 0
• No rubbing reported: 0
• Not recorded: 10

Fender modifications

• Rolled: 0
• Pulled: 0
• No trimming recorded: 0
• Other trimming label: 0
• Not recorded: 10

Spacers recorded on these builds

• 5mm — 2 builds

Absence of spacer records does not mean no spacer was used.

Counts are descriptive evidence only — not probabilities or clearance guarantees.

Nearby documented setups

Similar evidence — not the same setup.

• 20×10 ET257 builds · similar size
• 20×10 ET305 builds · similar size

Compare this setup with your OEM wheels

Prefills 20×10.5 ET25 on this vehicle in the fitment calculator.

Open fitment calculator

Related specs

• Bolt pattern: 5x112
• Center bore: 66.6 mm
• Thread: M14 x 1.5
• All documented 20×10.5 offsets for this year
• 2016 Audi SQ5 OEM wheel fitment

Size and offset evidence does not replace bolt pattern, hub bore, or thread requirements.