20×10 ET25
Documented Modified1 build
Tire: 295/40R20
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
20×10 ET25 Wheels on a 2016 Audi SQ5
7 documented builds specifically using ET25
Show evidence for this exact wheel size and offset on my vehicle/year. Exact size+offset builds are observational evidence only — not a universal fit, not the “correct” offset, and not a no-rub guarantee.
Evidence summary
- Documented builds using 20×10: 14
- Documented builds specifically using 20×10 ET25: 7
- Axle context: 3 square · 4 staggered · 5 front-only · 2 rear-only · 0 both axles
7 documented 2016 Audi SQ5 builds in our database use 20×10 ET25 wheels. This is observed use — not a fit confirmation.
Compared with OEM
Aftermarket: 20×10 ET25
Compared with the OEM 20×8.5 ET33 configuration.
Width: +1.5 in
Outer edge 27.1 mm farther toward fender (more outward poke)
Inner edge 11.1 mm closer to suspension (less inner clearance)
Geometry is deterministic vs the named OEM baseline. It does not mean the setup fits or will clear.
Tires documented with 20×10 ET25
- 275/40R20 — 3 builds
- 295/40R20 — 1 build
- 275/40R20: -1.3% overall diameter vs selected OEM tire — descriptive only, not a clearance rating.
- 295/40R20: +0.9% overall diameter vs selected OEM tire — descriptive only, not a clearance rating.
Documented tire pairings are not tire recommendations.
Suspension, rubbing, fender, and spacers
Suspension on documented builds
- Not recorded — 6
- Lowered on Springs — 1
Reported rubbing
- Rubbing reported: 0
- No rubbing reported: 0
- Not recorded: 7
Fender modifications
- Rolled: 0
- Pulled: 0
- No trimming recorded: 0
- Other trimming label: 0
- Not recorded: 7
Spacers recorded on these builds
- 15mm — 1 build
Absence of spacer records does not mean no spacer was used.
Counts are descriptive evidence only — not probabilities or clearance guarantees.
Exact documented builds
Showing 7 of 7 builds matching 20×10 ET25.
20×10 ET25
Documented Modified1 build
Tire: 275/40R20
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
20×10 ET25
Documented Modified1 build
CX-R
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
20×10 ET30
Documented Modified1 build
Rear: 20×10 ET25
Tire: 275/40R20
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
- Spacers
- 15mm
20×10 ET30
Documented Modified1 build
Rear: 20×10 ET25
Tire: 275/40R20
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
20×10 ET25
Documented Modified1 build
Tire: 275/40R20
- Suspension
- Lowered on Springs
- Rubbing
- Not reported
- Fender
- Not recorded
20×10 ET25
Documented Modified1 build
Rays Volk G25
Tire: 275/40R20
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
Nearby documented setups
Similar evidence — not the same setup.
Compare this setup with your OEM wheels
Prefills 20×10 ET25 on this vehicle in the fitment calculator.
Related specs
- Bolt pattern: 5x112
- Center bore: 66.6 mm
- Thread: M14 x 1.5
- All documented 20×10 offsets for this year
- 2016 Audi SQ5 OEM wheel fitment
Size and offset evidence does not replace bolt pattern, hub bore, or thread requirements.