18×9.5 ET12
Documented Modified1 build
Work Wheels CR-Kai
Tire: 235/40R18
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
18×9.5 ET12 Wheels on a 2003 Mitsubishi Lancer Evolution
4 documented builds specifically using ET12
Show evidence for this exact wheel size and offset on my vehicle/year. Exact size+offset builds are observational evidence only — not a universal fit, not the “correct” offset, and not a no-rub guarantee.
Evidence summary
- Documented builds using 18×9.5: 40
- Documented builds specifically using 18×9.5 ET12: 4
- Axle context: 0 square · 4 staggered · 4 front-only · 0 rear-only · 0 both axles
4 documented 2003 Mitsubishi Lancer Evolution builds in our database use 18×9.5 ET12 wheels. This is observed use — not a fit confirmation.
Compared with OEM
Aftermarket: 18×9.5 ET12
Compared with the OEM 18×8 ET38 configuration.
Width: +1.5 in
Outer edge 45 mm farther toward fender (more outward poke)
Inner edge 7 mm farther from suspension (more inner clearance)
Geometry is deterministic vs the named OEM baseline. It does not mean the setup fits or will clear.
Tires documented with 18×9.5 ET12
- 235/40R18 — 2 builds
- 255/35R18 — 1 build
- 235/40R18: +0.0% overall diameter vs selected OEM tire — descriptive only, not a clearance rating.
- 255/35R18: -1.5% overall diameter vs selected OEM tire — descriptive only, not a clearance rating.
Documented tire pairings are not tire recommendations.
Suspension, rubbing, fender, and spacers
Suspension on documented builds
- Not recorded — 4
Reported rubbing
- Rubbing reported: 0
- No rubbing reported: 0
- Not recorded: 4
Fender modifications
- Rolled: 0
- Pulled: 0
- No trimming recorded: 0
- Other trimming label: 0
- Not recorded: 4
Spacer data was not recorded on these exact builds.
Counts are descriptive evidence only — not probabilities or clearance guarantees.
Exact documented builds
Showing 4 of 4 builds matching 18×9.5 ET12.
18×9.5 ET12
Documented Modified1 build
Rays Volk Racing CE28N
Rear: 18×9.5 ET22
Tire: 235/40R18
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
18×9.5 ET12
Documented Modified1 build
Enkei NT03
Rear: 18×9.5 ET20
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
18×9.5 ET12
Documented Modified1 build
Enkei NT03+M
Rear: 18×9.5 ET20
Tire: 255/35R18
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
Nearby documented setups
Similar evidence — not the same setup.
Compare this setup with your OEM wheels
Prefills 18×9.5 ET12 on this vehicle in the fitment calculator.
Related specs
- Bolt pattern: 5x114.3
- Center bore: 67.1 mm
- Thread: M12 x 1.5
- All documented 18×9.5 offsets for this year
- 2003 Mitsubishi Lancer Evolution OEM wheel fitment
Size and offset evidence does not replace bolt pattern, hub bore, or thread requirements.