18×9.5 ET15
Documented Modified1 build
Enkei RPF1
Tire: 255/35R18
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
18×9.5 ET15 Wheels on a 2003 Mitsubishi Lancer Evolution
8 documented builds specifically using ET15
Show evidence for this exact wheel size and offset on my vehicle/year. Exact size+offset builds are observational evidence only — not a universal fit, not the “correct” offset, and not a no-rub guarantee.
Evidence summary
- Documented builds using 18×9.5: 40
- Documented builds specifically using 18×9.5 ET15: 8
- Axle context: 1 square · 7 staggered · 8 front-only · 0 rear-only · 0 both axles
8 documented 2003 Mitsubishi Lancer Evolution builds in our database use 18×9.5 ET15 wheels. This is observed use — not a fit confirmation.
Compared with OEM
Aftermarket: 18×9.5 ET15
Compared with the OEM 18×8 ET38 configuration.
Width: +1.5 in
Outer edge 42 mm farther toward fender (more outward poke)
Inner edge 4 mm farther from suspension (more inner clearance)
Geometry is deterministic vs the named OEM baseline. It does not mean the setup fits or will clear.
Tires documented with 18×9.5 ET15
- 235/40R18 — 2 builds
- 255/35R18 — 2 builds
- 245/40R18 — 1 build
- 235/40R18: +0.0% overall diameter vs selected OEM tire — descriptive only, not a clearance rating.
- 255/35R18: -1.5% overall diameter vs selected OEM tire — descriptive only, not a clearance rating.
- 245/40R18: +1.2% overall diameter vs selected OEM tire — descriptive only, not a clearance rating.
Documented tire pairings are not tire recommendations.
Suspension, rubbing, fender, and spacers
Suspension on documented builds
- Not recorded — 8
Reported rubbing
- Rubbing reported: 0
- No rubbing reported: 0
- Not recorded: 8
Fender modifications
- Rolled: 0
- Pulled: 0
- No trimming recorded: 0
- Other trimming label: 0
- Not recorded: 8
Spacer data was not recorded on these exact builds.
Counts are descriptive evidence only — not probabilities or clearance guarantees.
Exact documented builds
Showing 8 of 8 builds matching 18×9.5 ET15.
18×9.5 ET15
Documented Modified1 build
Enkei RPF1
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
18×9.5 ET15
Documented Modified1 build
Enkei RPF1 SBC
Tire: 235/40R18
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
18×9.5 ET15
Documented Modified1 build
Miro 398
Tire: 245/40R18
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
18×9.5 ET15
Documented Modified1 build
Enkei RPF1 SBC
Tire: 235/40R18
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
18×9.5 ET15
Documented Modified1 build
Rota Grid
Rear: 18×9.5 ET20
Tire: 255/35R18
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
18×9.5 ET15
Documented Modified1 build
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
18×9.5 ET15
Documented Modified1 build
Rota Grids
Rear: 18×9.5 ET20
- Suspension
- Not recorded
- Rubbing
- Not reported
- Fender
- Not recorded
Nearby documented setups
Similar evidence — not the same setup.
Compare this setup with your OEM wheels
Prefills 18×9.5 ET15 on this vehicle in the fitment calculator.
Related specs
- Bolt pattern: 5x114.3
- Center bore: 67.1 mm
- Thread: M12 x 1.5
- All documented 18×9.5 offsets for this year
- 2003 Mitsubishi Lancer Evolution OEM wheel fitment
Size and offset evidence does not replace bolt pattern, hub bore, or thread requirements.