2008 Chevrolet Malibu Wheel Backspacing
4.86 in · 5.00 in · 5.11 in
Quick specs
- Backspacing
- 4.86 in · 5.00 in · 5.11 in
- OEM offset
- ET41 · ET38
- Wheel size
- 6.5x15 · 6.5x16 · 7x17 · 7x18
- Bolt pattern
- 5×110
- Tire size
- Multiple — see configurations
OEM configurations
| Configuration | Rim | Offset | Backspacing | Tire | Bolt pattern | Center bore | Thread |
|---|---|---|---|---|---|---|---|
| 2.2 · I4, Petrol | 6.5x15 | ET41 | 4.86 in | 205/65R15 | 5x110 | 65.1 mm | M12 x 1.5 |
| 2.2 · I4, Petrol | 6.5x16 | ET41 | 4.86 in | 215/60R16 | 5x110 | 65.1 mm | M12 x 1.5 |
| 2.2 · I4, Petrol | 7x17 | ET38 | 5.00 in | 225/50R17 | 5x110 | 65.1 mm | M12 x 1.5 |
| 3.5 · V6, Petrol | 6.5x16 | ET41 | 4.86 in | 215/60R16 | 5x110 | 65.1 mm | M12 x 1.5 |
| 3.5 · V6, Petrol | 7x17 | ET38 | 5.00 in | 225/50R17 | 5x110 | 65.1 mm | M12 x 1.5 |
| 2.4 · 2.4L, I4, Petrol | 6.5x16 | ET41 | 4.86 in | 215/60R16 | 5x110 | 65.1 mm | M12 x 1.5 |
| 2.4 · 2.4L, I4, Petrol | 7x17 | ET38 | 5.00 in | 215/55R17 | 5x110 | 65.1 mm | M12 x 1.5 |
| 2.4 · 2.4L, I4, Petrol | 7x17 | ET38 | 5.00 in | 225/50R17 | 5x110 | 65.1 mm | M12 x 1.5 |
| 2.4 · 2.4L, I4, Petrol | 7x18 | ET41 | 5.11 in | 225/50R18 | 5x110 | 65.1 mm | M12 x 1.5 |
| 3.6 · 3.6L, V6, Petrol | 7x17 | ET38 | 5.00 in | 225/50R17 | 5x110 | 65.1 mm | M12 x 1.5 |
| 3.6 · 3.6L, V6, Petrol | 7x18 | ET41 | 5.11 in | 225/50R18 | 5x110 | 65.1 mm | M12 x 1.5 |
Compare wheel position See wheel offset
Backspacing values above are calculated from OEM wheel width and offset using BS = width/2 + offset_mm/25.4 (same formula as the fitment calculator).
Related tools
More on Amazon
LEXIVON 1/2-Inch Drive Click Torque Wrench 25-250 Ft-Lb/33.9-338.9 Nm (LX-184)
Related tool — not a vehicle-fit product.
Check price on Amazon
Wheeler Manual Firearms Accurizing Torque Wrench with Inch/Pounds Measurement, Bits and Storage Case for Scope Mounting, Gunsmithing and Maintenance
Related tool — not a vehicle-fit product.
Check price on Amazon
More specs for the 2008 Chevrolet Malibu
Backspacing on these pages is calculated from OEM wheel width and offset (width/2 + offset_mm/25.4). Higher backspacing seats the wheel farther inward; lower backspacing moves it outward.