2009 Dodge Challenger Wheel Backspacing
4.37 in · 4.69 in · 4.94 in · 5.23 in · 5.29 in · 5.52 in
Quick specs
- Backspacing
- 4.37 in · 4.69 in · 4.94 in · 5.23 in · 5.29 in · 5.52 in
- OEM offset
- ET22 · ET24 · ET25 · ET20 · ET26
- Wheel size
- Multiple — see configurations
- Bolt pattern
- 5×115
- Tire size
- Multiple — see configurations
OEM configurations
| Configuration | Front | Rear | Offset | Backspacing | Tire | Bolt pattern | Center bore | Thread |
|---|---|---|---|---|---|---|---|---|
| 3.5i · V6, Petrol | 7x17 | — | ET22 | 4.37 in | 215/65R17 | 5x115 | 71.6 mm | M14 x 1.5 |
| 3.5i · V6, Petrol | 7.5x18 | — | ET24 | 4.69 in | 235/55R18 | 5x115 | 71.6 mm | M14 x 1.5 |
| 3.5i · V6, Petrol | 7.5x19 | — | ET24 | 4.69 in | 235/50R19 | 5x115 | 71.6 mm | M14 x 1.5 |
| 3.5i · V6, Petrol | 8x20 | — | ET24 | 4.94 in | 245/45R20 | 5x115 | 71.6 mm | M14 x 1.5 |
| 5.7i · V8, Petrol | 7.5x18 | — | ET24 | 4.69 in | 235/55R18 | 5x115 | 71.6 mm | M14 x 1.5 |
| 5.7i · V8, Petrol | 8x20 | — | ET24 | 4.94 in | 245/45R20 | 5x115 | 71.6 mm | M14 x 1.5 |
| 5.7i · V8, Petrol | 8.5x21 | 10x21 | ET25 / ET41 | 5.23 in | 255/40R21 | 5x115 | 71.6 mm | M14 x 1.5 |
| 5.7i · V8, Petrol | 9x22 | 10x22 | ET20 / ET40 | 5.29 in | 265/30R22 | 5x115 | 71.6 mm | M14 x 1.5 |
| 6.1i · 6.1L, V8, Petrol | 9x20 | 9x20 | ET26 | 5.52 in | 245/45R20 / 245/40R20 | 5x115 | 71.6 mm | M14 x 1.5 |
Compare wheel position See wheel offset
Backspacing values above are calculated from OEM wheel width and offset using BS = width/2 + offset_mm/25.4 (same formula as the fitment calculator).
Related tools
More on Amazon
LEXIVON 1/2-Inch Drive Click Torque Wrench 25-250 Ft-Lb/33.9-338.9 Nm (LX-184)
Related tool — not a vehicle-fit product.
Check price on Amazon
Wheeler Manual Firearms Accurizing Torque Wrench with Inch/Pounds Measurement, Bits and Storage Case for Scope Mounting, Gunsmithing and Maintenance
Related tool — not a vehicle-fit product.
Check price on Amazon
More specs for the 2009 Dodge Challenger
Backspacing on these pages is calculated from OEM wheel width and offset (width/2 + offset_mm/25.4). Higher backspacing seats the wheel farther inward; lower backspacing moves it outward.