2010 Ford Edge Wheel Backspacing
5.32 in · 5.48 in · 6.04 in · 5.65 in · 5.90 in · 5.88 in
Quick specs
- Backspacing
- 5.32 in · 5.48 in · 6.04 in · 5.65 in · 5.90 in · 5.88 in
- OEM offset
- ET40 · ET44 · ET39 · ET42 · ET35
- Wheel size
- Multiple — see configurations
- Bolt pattern
- 5×114.3
- Tire size
- Multiple — see configurations
OEM configurations
| Configuration | Front | Rear | Offset | Backspacing | Tire | Bolt pattern | Center bore | Thread |
|---|---|---|---|---|---|---|---|---|
| 3.5i · 3.5L, V6, Petrol | 7.5x17 | — | ET40 | 5.32 in | 235/65R17 | 5x114.3 | 70.5 mm | 1/2" - 20 UNF |
| 3.5i · 3.5L, V6, Petrol | 7.5x18 | — | ET44 | 5.48 in | 245/60R18 | 5x114.3 | 70.5 mm | 1/2" - 20 UNF |
| 3.5i · 3.5L, V6, Petrol | 7.5x20 | — | ET44 | 5.48 in | 245/50R20 | 5x114.3 | 70.5 mm | 1/2" - 20 UNF |
| 3.5i · 3.5L, V6, Petrol | 9x22 | — | ET39 | 6.04 in | 265/40R22 | 5x114.3 | 70.5 mm | 1/2" - 20 UNF |
| 3.5i · 3.5L, V6, Petrol | 7.5x19 | — | ET44 | 5.48 in | 245/55R19 | 5x114.3 | 70.5 mm | 1/2" - 20 UNF |
| 3.5i · 3.5L, V6, Petrol | 8x19 | — | ET42 | 5.65 in | 255/50R19 | 5x114.3 | 70.5 mm | 1/2" - 20 UNF |
| 3.5i · 3.5L, V6, Petrol | 8.5x20 | 11x20 | ET42 / ET54 | 5.90 in | 255/45R20 | 5x114.3 | 70.5 mm | 1/2" - 20 UNF |
| 3.5i · 3.5L, V6, Petrol | 9x22 | — | ET35 | 5.88 in | 265/35R22 | 5x114.3 | 70.5 mm | 1/2" - 20 UNF |
Compare wheel position See wheel offset
Backspacing values above are calculated from OEM wheel width and offset using BS = width/2 + offset_mm/25.4 (same formula as the fitment calculator).
Related tools
More on Amazon
LEXIVON 1/2-Inch Drive Click Torque Wrench 25-250 Ft-Lb/33.9-338.9 Nm (LX-184)
Related tool — not a vehicle-fit product.
Check price on Amazon
Wheeler Manual Firearms Accurizing Torque Wrench with Inch/Pounds Measurement, Bits and Storage Case for Scope Mounting, Gunsmithing and Maintenance
Related tool — not a vehicle-fit product.
Check price on Amazon
More specs for the 2010 Ford Edge
Backspacing on these pages is calculated from OEM wheel width and offset (width/2 + offset_mm/25.4). Higher backspacing seats the wheel farther inward; lower backspacing moves it outward.