2019 Ford Explorer Wheel Backspacing
5.98 in · 6.07 in · 5.73 in · 6.38 in
Quick specs
- Backspacing
- 5.98 in · 6.07 in · 5.73 in · 6.38 in
- OEM offset
- ET44 · ET40 · ET54
- Wheel size
- 8.5x20 · 9x20 · 8x19 · 8x18
- Bolt pattern
- 5×114.3
- Tire size
- Multiple — see configurations
OEM configurations
| Configuration | Front | Rear | Offset | Backspacing | Tire | Bolt pattern | Center bore | Thread |
|---|---|---|---|---|---|---|---|---|
| 2.3 EcoBoost · I4, Petrol | 8.5x20 | 11x20 | ET44 / ET64 | 5.98 in | 255/50R20 | 5x114.3 | 63.4 mm | 1/2" - 20 UNF |
| 2.3 EcoBoost · I4, Petrol | 9x20 | — | ET40 | 6.07 in | 265/45R20 | 5x114.3 | 63.4 mm | 1/2" - 20 UNF |
| 3.5 EcoBoost · V6, Petrol | 8.5x20 | 11x20 | ET44 / ET64 | 5.98 in | 255/50R20 | 5x114.3 | 63.4 mm | 1/2" - 20 UNF |
| 3.5 EcoBoost · V6, Petrol | 9x20 | — | ET40 | 6.07 in | 265/45R20 | 5x114.3 | 63.4 mm | 1/2" - 20 UNF |
| 3.5Ti · 3.5L, V6, Flex-Fuel | 8x19 | 11x20 | ET44 / ET64 | 5.73 in | 265/70R19 | 5x114.3 | 63.4 mm | 1/2" - 20 UNF |
| 3.5Ti · 3.5L, V6, Flex-Fuel | 8.5x20 | — | ET54 | 6.38 in | 275/60R20 | 5x114.3 | 63.4 mm | 1/2" - 20 UNF |
| 3.5Ti · 3.5L, V6, Petrol | 8x18 | 9x18 | ET44 / ET51 | 5.73 in | 245/60R18 | 5x114.3 | 63.4 mm | 1/2" - 20 UNF |
| 3.5Ti · 3.5L, V6, Petrol | 8.5x20 | 11x20 | ET44 / ET64 | 5.98 in | 255/50R20 | 5x114.3 | 63.4 mm | 1/2" - 20 UNF |
Compare wheel position See wheel offset
Backspacing values above are calculated from OEM wheel width and offset using BS = width/2 + offset_mm/25.4 (same formula as the fitment calculator).
Related tools
More on Amazon
LEXIVON 1/2-Inch Drive Click Torque Wrench 25-250 Ft-Lb/33.9-338.9 Nm (LX-184)
Related tool — not a vehicle-fit product.
Check price on Amazon
Wheeler Manual Firearms Accurizing Torque Wrench with Inch/Pounds Measurement, Bits and Storage Case for Scope Mounting, Gunsmithing and Maintenance
Related tool — not a vehicle-fit product.
Check price on Amazon
More specs for the 2019 Ford Explorer
Backspacing on these pages is calculated from OEM wheel width and offset (width/2 + offset_mm/25.4). Higher backspacing seats the wheel farther inward; lower backspacing moves it outward.