2004 Honda Pilot Wheel Backspacing
5.02 in · 5.60 in · 5.47 in · 5.72 in · 5.77 in · 5.90 in · 6.00 in
Quick specs
- Backspacing
- 5.02 in · 5.60 in · 5.47 in · 5.72 in · 5.77 in · 5.90 in · 6.00 in
- OEM offset
- ET45 · ET47 · ET50 · ET42 · ET38
- Wheel size
- Multiple — see configurations
- Bolt pattern
- 5×114.3
- Tire size
- Multiple — see configurations
OEM configurations
| Configuration | Front | Rear | Offset | Backspacing | Tire | Bolt pattern | Center bore | Thread |
|---|---|---|---|---|---|---|---|---|
| 3.5i · V6, Petrol | 6.5x16 | — | ET45 | 5.02 in | 235/70R16 | 5x114.3 | 64.1 mm | M12 x 1.5 |
| 3.5i · V6, Petrol | 7.5x16 | — | ET47 | 5.60 in | 255/65R16 | 5x114.3 | 64.1 mm | M12 x 1.5 |
| 3.5i · V6, Petrol | 7x17 | — | ET50 | 5.47 in | 235/65R17 | 5x114.3 | 64.1 mm | M12 x 1.5 |
| 3.5i · V6, Petrol | 7.5x17 | 8.5x17 | ET47 / ET50 | 5.60 in | 255/60R17 | 5x114.3 | 64.1 mm | M12 x 1.5 |
| 3.5i · V6, Petrol | 7.5x18 | — | ET50 | 5.72 in | 235/60R18 | 5x114.3 | 64.1 mm | M12 x 1.5 |
| 3.5i · V6, Petrol | 8x18 | — | ET45 | 5.77 in | 255/55R18 | 5x114.3 | 64.1 mm | M12 x 1.5 |
| 3.5i · V6, Petrol | 8x19 | — | ET45 | 5.77 in | 255/50R19 | 5x114.3 | 64.1 mm | M12 x 1.5 |
| 3.5i · V6, Petrol | 8.5x20 | 11x20 | ET42 / ET54 | 5.90 in | 255/45R20 | 5x114.3 | 64.1 mm | M12 x 1.5 |
| 3.5i · V6, Petrol | 9x20 | — | ET38 | 6.00 in | 265/45R20 | 5x114.3 | 64.1 mm | M12 x 1.5 |
Compare wheel position See wheel offset
Backspacing values above are calculated from OEM wheel width and offset using BS = width/2 + offset_mm/25.4 (same formula as the fitment calculator).
Related tools
More on Amazon
LEXIVON 1/2-Inch Drive Click Torque Wrench 25-250 Ft-Lb/33.9-338.9 Nm (LX-184)
Related tool — not a vehicle-fit product.
Check price on Amazon
Wheeler Manual Firearms Accurizing Torque Wrench with Inch/Pounds Measurement, Bits and Storage Case for Scope Mounting, Gunsmithing and Maintenance
Related tool — not a vehicle-fit product.
Check price on Amazon
More specs for the 2004 Honda Pilot
Backspacing on these pages is calculated from OEM wheel width and offset (width/2 + offset_mm/25.4). Higher backspacing seats the wheel farther inward; lower backspacing moves it outward.