2008 Honda S2000 Wheel Backspacing
5.67 in · 5.77 in · 5.42 in · 5.72 in
Quick specs
- Backspacing
- 5.67 in · 5.77 in · 5.42 in · 5.72 in
- OEM offset
- ET55 · ET45 · ET50
- Wheel size
- 7x17 · 8x18 · 6.5x16 · 7.5x18
- Bolt pattern
- 5×114.3
- Tire size
- 215/45R17 · 235/35R18 · 205/55R16 · 225/40R18
OEM configurations
| Configuration | Front | Rear | Offset | Backspacing | Tire | Bolt pattern | Center bore | Thread |
|---|---|---|---|---|---|---|---|---|
| 2.2i · I4, Petrol | 7x17 | 7x17 | ET55 | 5.67 in | 215/45R17 | 5x114.3 | 70.1 mm | M12 x 1.5 |
| 2.2i · I4, Petrol | 8x18 | 7x17 | ET45 / ET55 | 5.77 in | 235/35R18 / 215/45R17 | 5x114.3 | 70.1 mm | M12 x 1.5 |
| 2.0i · 2.0L, I4, Petrol | 6.5x16 | 6.5x16 | ET55 | 5.42 in | 205/55R16 | 5x114.3 | 70.1 mm | M12 x 1.5 |
| 2.0i · 2.0L, I4, Petrol | 7x17 | 6.5x16 | ET55 | 5.67 in | 215/45R17 / 205/55R16 | 5x114.3 | 70.1 mm | M12 x 1.5 |
| 2.2i (ABA-AP2) · I4, Petrol | 7x17 | 7x17 | ET55 | 5.67 in | 215/45R17 | 5x114.3 | 70.1 mm | M12 x 1.5 |
| 2.2i (ABA-AP2) · I4, Petrol | 7.5x18 | 7x17 | ET50 / ET55 | 5.72 in | 225/40R18 / 215/45R17 | 5x114.3 | 70.1 mm | M12 x 1.5 |
| 2.2i (ABA-AP2) · I4, Petrol | 8x18 | 7x17 | ET45 / ET55 | 5.77 in | 235/35R18 / 215/45R17 | 5x114.3 | 70.1 mm | M12 x 1.5 |
| 2.0i · I4, Petrol | 6.5x16 | 6.5x16 | ET55 | 5.42 in | 205/55R16 | 5x114.3 | 70.1 mm | M12 x 1.5 |
| 2.0i · I4, Petrol | 7x17 | 6.5x16 | ET55 | 5.67 in | 215/45R17 / 205/55R16 | 5x114.3 | 70.1 mm | M12 x 1.5 |
Compare wheel position See wheel offset
Backspacing values above are calculated from OEM wheel width and offset using BS = width/2 + offset_mm/25.4 (same formula as the fitment calculator).
Related tools
More on Amazon
LEXIVON 1/2-Inch Drive Click Torque Wrench 25-250 Ft-Lb/33.9-338.9 Nm (LX-184)
Related tool — not a vehicle-fit product.
Check price on Amazon
Wheeler Manual Firearms Accurizing Torque Wrench with Inch/Pounds Measurement, Bits and Storage Case for Scope Mounting, Gunsmithing and Maintenance
Related tool — not a vehicle-fit product.
Check price on Amazon
More specs for the 2008 Honda S2000
Backspacing on these pages is calculated from OEM wheel width and offset (width/2 + offset_mm/25.4). Higher backspacing seats the wheel farther inward; lower backspacing moves it outward.