2010 Kia Optima Wheel Backspacing
5.06 in · 5.56 in · 4.86 in · 4.98 in
Quick specs
- Backspacing
- 5.06 in · 5.56 in · 4.86 in · 4.98 in
- OEM offset
- ET46 · ET41 · ET44
- Wheel size
- 6.5x16 · 6.5x17 · 7.5x18
- Bolt pattern
- 5×114.3
- Tire size
- Multiple — see configurations
OEM configurations
| Configuration | Front | Rear | Offset | Backspacing | Tire | Bolt pattern | Center bore | Thread |
|---|---|---|---|---|---|---|---|---|
| 2.4i · I4, Petrol | 6.5x16 | — | ET46 | 5.06 in | 205/60R16 | 5x114.3 | 67.1 mm | M12 x 1.5 |
| 2.4i · I4, Petrol | 6.5x17 | — | ET46 | 5.06 in | 215/50R17 | 5x114.3 | 67.1 mm | M12 x 1.5 |
| 2.7i · 2.7L, V6, Petrol | 6.5x16 | — | ET46 | 5.06 in | 205/60R16 | 5x114.3 | 67.1 mm | M12 x 1.5 |
| 2.7i · 2.7L, V6, Petrol | 6.5x17 | — | ET46 | 5.06 in | 215/50R17 | 5x114.3 | 67.1 mm | M12 x 1.5 |
| 2.0 T-GDi · 2.0L, I4, Petrol | 7.5x18 | 7.5x18 | ET46 | 5.56 in | 225/45R18 | 5x114.3 | 67.1 mm | M12 x 1.5 |
| 2.0i · 2.0L, G4ND, I4, Petrol | 6.5x16 | 7.5x18 | ET41 / ET46 | 4.86 in | 205/65R16 / 225/45R18 | 5x114.3 | 67.1 mm | M12 x 1.5 |
| 2.0i · 2.0L, G4ND, I4, Petrol | 6.5x17 | 7.5x18 | ET44 / ET46 | 4.98 in | 215/55R17 / 225/45R18 | 5x114.3 | 67.1 mm | M12 x 1.5 |
| 2.0i · 2.0L, I4, Petrol | 6.5x16 | — | ET46 | 5.06 in | 205/60R16 | 5x114.3 | 67.1 mm | M12 x 1.5 |
| 2.0i · 2.0L, I4, Petrol | 6.5x17 | — | ET46 | 5.06 in | 215/50R17 | 5x114.3 | 67.1 mm | M12 x 1.5 |
Compare wheel position See wheel offset
Backspacing values above are calculated from OEM wheel width and offset using BS = width/2 + offset_mm/25.4 (same formula as the fitment calculator).
Related tools
More on Amazon
LEXIVON 1/2-Inch Drive Click Torque Wrench 25-250 Ft-Lb/33.9-338.9 Nm (LX-184)
Related tool — not a vehicle-fit product.
Check price on Amazon
Wheeler Manual Firearms Accurizing Torque Wrench with Inch/Pounds Measurement, Bits and Storage Case for Scope Mounting, Gunsmithing and Maintenance
Related tool — not a vehicle-fit product.
Check price on Amazon
More specs for the 2010 Kia Optima
Backspacing on these pages is calculated from OEM wheel width and offset (width/2 + offset_mm/25.4). Higher backspacing seats the wheel farther inward; lower backspacing moves it outward.