2005 Kia Sedona Wheel Backspacing
4.97 in · 4.77 in · 5.27 in · 5.02 in · 5.17 in · 4.82 in · 5.67 in
Quick specs
- Backspacing
- 4.97 in · 4.77 in · 5.27 in · 5.02 in · 5.17 in · 4.82 in · 5.67 in
- OEM offset
- ET50 · ET45 · ET55 · ET40
- Wheel size
- 6x15 · 7x16 · 6.5x15
- Bolt pattern
- 5×114.3
- Tire size
- Multiple — see configurations
OEM configurations
| Configuration | Front | Rear | Offset | Backspacing | Tire | Bolt pattern | Center bore | Thread |
|---|---|---|---|---|---|---|---|---|
| 3.5i · V6, Petrol | 6x15 | — | ET50 | 4.97 in | 215/70R15 | 5x114.3 | 67.1 mm | M12 x 1.5 |
| 2.5i · V6, Petrol | 6x15 | — | ET50 | 4.97 in | 205/70R15 | 5x114.3 | 67.1 mm | M12 x 1.5 |
| 2.5i · V6, Petrol | 6x15 | — | ET50 | 4.97 in | 215/65R15 | 5x114.3 | 67.1 mm | M12 x 1.5 |
| 2.5i · V6, Petrol | 6x15 | — | ET45 | 4.77 in | 215/65R15 | 5x114.3 | 67.1 mm | M12 x 1.5 |
| 2.5i · V6, Petrol | 7x16 | — | ET45 | 5.27 in | 225/55R16 | 5x114.3 | 67.1 mm | M12 x 1.5 |
| 2.9 CRDi · I4, Diesel | 6.5x15 | — | ET45 | 5.02 in | 205/80R15 | 5x114.3 | 64.1 mm | M12 x 1.5 |
| 2.9 CRDi · I4, Diesel | 6x15 | — | ET55 | 5.17 in | 235/55R15 | 5x114.3 | 64.1 mm | M12 x 1.5 |
| 2.9 CRDi · I4, Diesel | 6.5x15 | — | ET40 | 4.82 in | 235/55R15 | 5x114.3 | 64.1 mm | M12 x 1.5 |
| 2.9 CRDi · I4, Diesel | 7x16 | 8.5x17 | ET55 / ET60 | 5.67 in | 205/55R16 | 5x114.3 | 64.1 mm | M12 x 1.5 |
Compare wheel position See wheel offset
Backspacing values above are calculated from OEM wheel width and offset using BS = width/2 + offset_mm/25.4 (same formula as the fitment calculator).
Related tools
More on Amazon
LEXIVON 1/2-Inch Drive Click Torque Wrench 25-250 Ft-Lb/33.9-338.9 Nm (LX-184)
Related tool — not a vehicle-fit product.
Check price on Amazon
Wheeler Manual Firearms Accurizing Torque Wrench with Inch/Pounds Measurement, Bits and Storage Case for Scope Mounting, Gunsmithing and Maintenance
Related tool — not a vehicle-fit product.
Check price on Amazon
More specs for the 2005 Kia Sedona
Backspacing on these pages is calculated from OEM wheel width and offset (width/2 + offset_mm/25.4). Higher backspacing seats the wheel farther inward; lower backspacing moves it outward.