2009 Mercedes-Benz CL-Class Wheel Backspacing
5.69 in · 5.94 in
Quick specs
OEM configurations
| Configuration | Front | Rear | Offset | Backspacing | Tire | Bolt pattern | Center bore | Thread |
|---|---|---|---|---|---|---|---|---|
| CL 550 · 5.5L, M 273.961, V8, Petrol | 8x17 | 8.5x18 | ET43 | 5.69 in | 235/55R17 / 255/45R18 | 5x112 | 66.6 mm | M14 x 1.5 |
| CL 550 · 5.5L, M 273.961, V8, Petrol | 8.5x18 | 8.5x18 | ET43 | 5.94 in | 255/45R18 | 5x112 | 66.6 mm | M14 x 1.5 |
| CL 550 · 5.5L, M 273.961, V8, Petrol | 8.5x19 | 8.5x18 | ET43 | 5.94 in | 255/40R19 / 255/45R18 | 5x112 | 66.6 mm | M14 x 1.5 |
| CL 550 · 5.5L, M 273.961, V8, Petrol | 8.5x20 | 8.5x18 | ET43 | 5.94 in | 255/35R20 / 255/45R18 | 5x112 | 66.6 mm | M14 x 1.5 |
| CL 500 · 5.5L, M 273.961, V8, Petrol | 8x17 | 8.5x18 | ET43 | 5.69 in | 235/55R17 / 255/45R18 | 5x112 | 66.6 mm | M14 x 1.5 |
| CL 500 · 5.5L, M 273.961, V8, Petrol | 8.5x18 | 8.5x18 | ET43 | 5.94 in | 255/45R18 | 5x112 | 66.6 mm | M14 x 1.5 |
| CL 500 · 5.5L, M 273.961, V8, Petrol | 8.5x19 | 8.5x18 | ET43 | 5.94 in | 255/40R19 / 255/45R18 | 5x112 | 66.6 mm | M14 x 1.5 |
| CL 500 · 5.5L, M 273.961, V8, Petrol | 8.5x20 | 8.5x18 | ET43 | 5.94 in | 255/35R20 / 255/45R18 | 5x112 | 66.6 mm | M14 x 1.5 |
| CL 600 · 5.5L, M 275 E55 AL, V12, Petrol | 8.5x18 | 8.5x18 | ET43 | 5.94 in | 255/45R18 | 5x112 | 66.6 mm | M14 x 1.5 |
Compare wheel position See wheel offset
Backspacing values above are calculated from OEM wheel width and offset using BS = width/2 + offset_mm/25.4 (same formula as the fitment calculator).
Related tools
More on Amazon
LEXIVON 1/2-Inch Drive Click Torque Wrench 25-250 Ft-Lb/33.9-338.9 Nm (LX-184)
Related tool — not a vehicle-fit product.
Check price on Amazon
Wheeler Manual Firearms Accurizing Torque Wrench with Inch/Pounds Measurement, Bits and Storage Case for Scope Mounting, Gunsmithing and Maintenance
Related tool — not a vehicle-fit product.
Check price on Amazon
More specs for the 2009 Mercedes-Benz CL-Class
Backspacing on these pages is calculated from OEM wheel width and offset (width/2 + offset_mm/25.4). Higher backspacing seats the wheel farther inward; lower backspacing moves it outward.