2020 Nissan 370Z Wheel Backspacing
6.32 in · 5.69 in · 6.35 in · 6.60 in
Quick specs
- Backspacing
- 6.32 in · 5.69 in · 6.35 in · 6.60 in
- OEM offset
- ET40 · ET43 · ET47
- Wheel size
- 9.5x19 · 8x18 · 9x19
- Bolt pattern
- 5×114.3
- Tire size
- 245/40R19 · 225/50R18
OEM configurations
| Configuration | Front | Rear | Offset | Backspacing | Tire | Bolt pattern | Center bore | Thread |
|---|---|---|---|---|---|---|---|---|
| 3.7 Nismo · 3.7L, VQ37VHR, V6, Petrol | 9.5x19 | 9.5x19 | ET40 | 6.32 in | 245/40R19 | 5x114.3 | 66.1 mm | M12 x 1.25 |
| 3.7 Nismo · 3.7L, VQ37VHR, V6, Petrol | 9.5x19 | 9.5x19 | ET40 | 6.32 in | 245/40R19 | 5x114.3 | 66.1 mm | M12 x 1.25 |
| 3.7i · 3.7L, VQ37VHR, V6, Petrol | 8x18 | 8x18 | ET43 | 5.69 in | 225/50R18 | 5x114.3 | 66.1 mm | M12 x 1.25 |
| 3.7i · 3.7L, VQ37VHR, V6, Petrol | 9x19 | 8x18 | ET47 / ET43 | 6.35 in | 245/40R19 / 225/50R18 | 5x114.3 | 66.1 mm | M12 x 1.25 |
| 3.7i · 3.7L, VQ37VHR, V6, Petrol | 9x19 | 9x19 | ET47 | 6.35 in | 245/40R19 | 5x114.3 | 66.1 mm | M12 x 1.25 |
| 3.7 Nismo · VQ37VHR, V6, Petrol | 9.5x19 | 9.5x19 | ET47 | 6.60 in | 245/40R19 | 5x114.3 | 66.1 mm | M12 x 1.25 |
| 3.7i · VQ37VHR, V6, Petrol | 8x18 | 8x18 | ET43 | 5.69 in | 225/50R18 | 5x114.3 | 66.1 mm | M12 x 1.25 |
| 3.7i · VQ37VHR, V6, Petrol | 9x19 | 8x18 | ET47 / ET43 | 6.35 in | 245/40R19 / 225/50R18 | 5x114.3 | 66.1 mm | M12 x 1.25 |
Compare wheel position See wheel offset
Backspacing values above are calculated from OEM wheel width and offset using BS = width/2 + offset_mm/25.4 (same formula as the fitment calculator).
Related tools
More on Amazon
LEXIVON 1/2-Inch Drive Click Torque Wrench 25-250 Ft-Lb/33.9-338.9 Nm (LX-184)
Related tool — not a vehicle-fit product.
Check price on Amazon
Wheeler Manual Firearms Accurizing Torque Wrench with Inch/Pounds Measurement, Bits and Storage Case for Scope Mounting, Gunsmithing and Maintenance
Related tool — not a vehicle-fit product.
Check price on Amazon
More specs for the 2020 Nissan 370Z
Backspacing on these pages is calculated from OEM wheel width and offset (width/2 + offset_mm/25.4). Higher backspacing seats the wheel farther inward; lower backspacing moves it outward.