2010 Nissan Murano Wheel Backspacing
5.72 in · 5.13 in
Quick specs
- Backspacing
- 5.72 in · 5.13 in
- OEM offset
- ET50 · ET35
- Wheel size
- 7.5x18 · 7.5x20
- Bolt pattern
- 5×114.3
- Tire size
- 235/65R18 · 235/55R20
OEM configurations
| Configuration | Rim | Offset | Backspacing | Tire | Bolt pattern | Center bore | Thread |
|---|---|---|---|---|---|---|---|
| 3.5i · V6, Petrol | 7.5x18 | ET50 | 5.72 in | 235/65R18 | 5x114.3 | 66.1 mm | M12 x 1.25 |
| 3.5i · V6, Petrol | 7.5x20 | ET50 | 5.72 in | 235/55R20 | 5x114.3 | 66.1 mm | M12 x 1.25 |
| 3.5i · V6, Petrol | 7.5x18 | ET35 | 5.13 in | 235/65R18 | 5x114.3 | 66.1 mm | M12 x 1.25 |
| 2.5 dCi · I4, Diesel | 7.5x18 | ET50 | 5.72 in | 235/65R18 | 5x114.3 | 66.1 mm | M12 x 1.25 |
| 2.5 dCi · I4, Diesel | 7.5x20 | ET50 | 5.72 in | 235/55R20 | 5x114.3 | 66.1 mm | M12 x 1.25 |
| 3.5i · 3.5L, VQ35DE, V6, Petrol | 7.5x18 | ET50 | 5.72 in | 235/65R18 | 5x114.3 | 66.1 mm | M12 x 1.25 |
| 3.5i · 3.5L, VQ35DE, V6, Petrol | 7.5x20 | ET50 | 5.72 in | 235/55R20 | 5x114.3 | 66.1 mm | M12 x 1.25 |
| 2.5i (TNZ51) · I4, Petrol | 7.5x18 | ET50 | 5.72 in | 235/65R18 | 5x114.3 | 66.1 mm | M12 x 1.25 |
| 2.5i (TZ51) · I4, Petrol | 7.5x18 | ET50 | 5.72 in | 235/65R18 | 5x114.3 | 66.1 mm | M12 x 1.25 |
| 3.5i (PNZ51) · V6, Petrol | 7.5x18 | ET50 | 5.72 in | 235/65R18 | 5x114.3 | 66.1 mm | M12 x 1.25 |
Compare wheel position See wheel offset
Backspacing values above are calculated from OEM wheel width and offset using BS = width/2 + offset_mm/25.4 (same formula as the fitment calculator).
Related tools
More on Amazon
LEXIVON 1/2-Inch Drive Click Torque Wrench 25-250 Ft-Lb/33.9-338.9 Nm (LX-184)
Related tool — not a vehicle-fit product.
Check price on Amazon
Wheeler Manual Firearms Accurizing Torque Wrench with Inch/Pounds Measurement, Bits and Storage Case for Scope Mounting, Gunsmithing and Maintenance
Related tool — not a vehicle-fit product.
Check price on Amazon
More specs for the 2010 Nissan Murano
Backspacing on these pages is calculated from OEM wheel width and offset (width/2 + offset_mm/25.4). Higher backspacing seats the wheel farther inward; lower backspacing moves it outward.