2014 Scion xD Wheel Backspacing
4.54 in · 4.77 in · 5.02 in · 5.27 in · 5.36 in · 5.50 in
Quick specs
- Backspacing
- 4.54 in · 4.77 in · 5.02 in · 5.27 in · 5.36 in · 5.50 in
- OEM offset
- ET39 · ET45 · ET41 · ET38
- Wheel size
- Multiple — see configurations
- Bolt pattern
- 5×100
- Tire size
- Multiple — see configurations
OEM configurations
| Configuration | Front | Rear | Offset | Backspacing | Tire | Bolt pattern | Center bore | Thread |
|---|---|---|---|---|---|---|---|---|
| 1.8i · I4, Petrol | 6x16 | 6.5x17 | ET39 / ET45 | 4.54 in | 195/60R16 / 205/50R17 | 5x100 | 56.1 mm | M12 x 1.5 |
| 1.8i · I4, Petrol | 6x16 | 6.5x17 | ET45 | 4.77 in | 195/60R16 / 205/50R17 | 5x100 | 56.1 mm | M12 x 1.5 |
| 1.8i · I4, Petrol | 6.5x16 | 6.5x17 | ET45 | 5.02 in | 205/55R16 / 205/50R17 | 5x100 | 56.1 mm | M12 x 1.5 |
| 1.8i · I4, Petrol | 7x17 | 6.5x17 | ET45 | 5.27 in | 215/50R17 / 205/50R17 | 5x100 | 56.1 mm | M12 x 1.5 |
| 1.8i · I4, Petrol | 7x18 | 6.5x17 | ET45 | 5.27 in | 205/45R18 / 205/50R17 | 5x100 | 56.1 mm | M12 x 1.5 |
| 1.8i · I4, Petrol | 7x18 | 6.5x17 | ET45 | 5.27 in | 215/45R18 / 205/50R17 | 5x100 | 56.1 mm | M12 x 1.5 |
| 1.8i · I4, Petrol | 7.5x18 | 6.5x17 | ET41 / ET45 | 5.36 in | 225/40R18 / 205/50R17 | 5x100 | 56.1 mm | M12 x 1.5 |
| 1.8i · I4, Petrol | 8x18 | 6.5x17 | ET38 / ET45 | 5.50 in | 235/40R18 / 205/50R17 | 5x100 | 56.1 mm | M12 x 1.5 |
Compare wheel position See wheel offset
Backspacing values above are calculated from OEM wheel width and offset using BS = width/2 + offset_mm/25.4 (same formula as the fitment calculator).
Related tools
More on Amazon
LEXIVON 1/2-Inch Drive Click Torque Wrench 25-250 Ft-Lb/33.9-338.9 Nm (LX-184)
Related tool — not a vehicle-fit product.
Check price on Amazon
Wheeler Manual Firearms Accurizing Torque Wrench with Inch/Pounds Measurement, Bits and Storage Case for Scope Mounting, Gunsmithing and Maintenance
Related tool — not a vehicle-fit product.
Check price on Amazon
More specs for the 2014 Scion xD
Backspacing on these pages is calculated from OEM wheel width and offset (width/2 + offset_mm/25.4). Higher backspacing seats the wheel farther inward; lower backspacing moves it outward.