2019 FIAT 500X Lug Nut Size
We are going to give you some tips on FIAT 500X lug nut size you should know before you pick up a set of wheels for your vehicle.
A good wheel in the right setup is going to make the difference between something that just was not thought out and pretty much guessed.
If you are trying to figure out what your set of wheels for FIAT 500X should be and after visiting tons of forums still left with more questions than answers, than this is your final stop. Lots of people do not understand the principles of diameter, width and offsets.
FIAT 500X Lug Nut Size
2019Shop for Tires at Tire Rack.
2019 500X Bolt Pattern | PCD 5x110 |
Wheel fasteners | Lug bolts |
Thread Size |
M12 x 1.25
Get Lug Nuts |
The Number of Lugs Needed |
5 per wheel
Caps & Covers |
Thread Pitch | 1.25 |
Lug Tightening Torque | 120 Nm |
Center bore (hub bore) |
65.1 mm![]() Center caps |
How to find a FIAT 500X 2019 lug nut size?
If you're looking for the lug nut size for your car, there are a few things you need to know. First, it can be found in the manual, your most reliable source of car information. Second, you don't always have to carry it around, because you can access the same information by simply opening our FIAT 500X 2019 lug nut size chart.
We keep our lug nut size dimensions charts up to date and check them regularly. So you can use this information whenever you need to replace your lug nuts.
What is a FIAT 500X 2019 lug nut socket size?
The lug nut socket size is the diameter of the circle that the lug nuts sit in. It's usually measured in millimeters.
To find your car's lug nut socket size, look for a small stamping on the side of one of the lug nuts. The number next to this stamping is your car's lug nut socket size. If you cannot find it or it became unreadable, don't worry. You can rely on the FIAT 500X 2019 lug nuts size information provided in our chart.
Why does your FIAT 500X 2019 lug nut torque matter?
Replacing lug nuts can be tricky, they are quite sensitive to the power applied. To secure them correctly you need to know the exact lug nut torque for FIAT 500X 2019 wheels.
If you go too tight it can cause serious problems like stuck and stripped lug nuts, or cross-threading. If you overtighten them, it can damage the wheel and the vehicle may become unsafe to drive. These issues can be dangerous to your car and they are troublesome to fix.
The good news is that you can find all the right lug nut torque values on our website.
How to measure lug nut size?
You will need a lug nut wrench to measure the size of your FIAT 500X 2019 lug nuts. Place the wrench over the nut and check the size that is stamped on the side of the wrench.
This is pretty straightforward, but to be able to use this method you must have a special instrument, that is the only drawback.

2019 FIAT 500X specs
Wheel Offset | |
Lug Nut Size | M12 x 1.25 |