Toyota Corolla Lug Nut Chart
We are going to give you some tips on Toyota Corolla lug nut size you should know before you pick up a set of wheels for your vehicle.
A good wheel in the right setup is going to make the difference between something that just was not thought out and pretty much guessed.
If you are trying to figure out what your set of wheels for Toyota Corolla should be and after visiting tons of forums still left with more questions than answers, than this is your final stop. Lots of people do not understand the principles of diameter, width and offsets.
Where to find your Toyota Corolla lug nut size?
It is important to know the lug nut size for your Toyota Corolla. The lug nuts secure the wheel to the car and make it safe to drive. If the lug nuts are too loose, the wheel could come off while driving. There are a few ways to find out the lug nut size for your vehicle. One way is to look it up in the manual, but it is much more convenient to use our online Toyota Corolla lug nut size chart.
Why do you need to know the Toyota Corolla lug nut torque?
If the lug nuts are too tight, the wheel could become damaged. It is crucial to use the correct lug nut torque so that the wheel is properly secured and you avoid stripped or cross-threaded lug nuts. This particular information can be easily found in the Toyota Corolla lug nut chart.

Toyota Corolla Lug Nut Size
2021 2020 2019 2018Shop for Tires at Tire Rack.
Center bore (hub bore) | 54.1 mm![]() |
Thread Diameter | M12 x 1.5![]() |

Toyota Corolla Lug Nut Size
2017 2016 2015 2014 2013Shop for Tires at Tire Rack.
Center bore (hub bore) | 54.1 mm![]() |
Thread Diameter | M12 x 1.5![]() |

Toyota Corolla Lug Nut Size
2012 2011 2010 2009Shop for Tires at Tire Rack.
Center bore (hub bore) | 54.1 mm![]() |
Thread Diameter | M12 x 1.5![]() |

Toyota Corolla Lug Nut Size
2008 2007 2006 2005 2004 2003 2002Shop for Tires at Tire Rack.
Center bore (hub bore) | 54.1 mm![]() |
Thread Diameter | M12 x 1.5![]() |

Toyota Corolla Lug Nut Size
2001 2000 1999Shop for Tires at Tire Rack.
Center bore (hub bore) | 54.1 mm![]() |
Thread Diameter | M12 x 1.5![]() |