Toyota Sequoia Wheel Offset Chart
We are going to give you some tips on Toyota Sequoia wheel offset you should know before you pick up a set of wheels for your vehicle.
A good wheel in the right setup is going to make the difference between something that just was not thought out and pretty much guessed.
If you are trying to figure out what your set of wheels for Toyota Sequoia should be and after visiting tons of forums still left with more questions than answers, than this is your final stop. Lots of people do not understand the principles of diameter, width and offsets.

Toyota Sequoia Wheel Offset
2020 2019 2018Stock wheel offset | -44 to 51 mm Try Wheel Spacers |
Sequoia Bolt Pattern | PCD 5x150 See Adapters |
Center bore (hub bore) | 110.5 Use Hub Centric Rings |
Thread Diameter | M14 x 1.5 Lug Nuts |
Stock Rim Sizes Range | 18x8.0 – 22x12.0 Hubcaps |

Toyota Sequoia Wheel Offset
2017 2016 2015 2014 2013 2012 2011 2010 2008Stock wheel offset | -44 to 50 mm Try Wheel Spacers |
Sequoia Bolt Pattern | PCD 5x150 See Adapters |
Center bore (hub bore) | 110.5 Use Hub Centric Rings |
Thread Diameter | M14 x 1.5 Lug Nuts |
Stock Rim Sizes Range | 18x8.0 – 24x12.0 Hubcaps |
Custom rim sizes range | R20 – R24 Custom Wheels |

Toyota Sequoia Wheel Offset
2007Stock wheel offset | -4 to 20 mm Try Wheel Spacers |
Sequoia Bolt Pattern | PCD 6x139.7 See Adapters |
Stock Rim Sizes Range | 16x7.0 – 22x9.5 Hubcaps |

Toyota Sequoia Wheel Offset
2006 2005 2004 2003 2002 2001Stock wheel offset | -4 to 20 mm Try Wheel Spacers |
Sequoia Bolt Pattern | PCD 6x139.7 See Adapters |
Center bore (hub bore) | 106.1 Use Hub Centric Rings |
Thread Diameter | M12 x 1.5 Lug Nuts |
Stock Rim Sizes Range | 16x7.0 – 22x9.5 Hubcaps |