When you buy through links on our site, we may earn an affiliate commission.

2010 Toyota Tacoma Wheel Offset Chart

What offset are stock 2010 Toyota Tacoma wheels? Some specs closely coordinate a truck model along with its functioning. Wheel offset is merely one of such specs. There are 3 sorts of wheel offset: positive, zero, and negative. The stock offset of a 2010 Toyota Tacoma basically tends to be in the positive classification. A positive wheel offset straightforwardly hints at that the center mounting top layer is more close to the center of the wheel. Consequently, the wheels stand out less than they ever would with a zero or negative offset. This delivers the motor vehicle a new predatory appearance. The negative offset appear to be the opposite, including zero comes in between.

Can I obtain a custom-made 2010 Toyota Tacoma wheel offset? A few cost-effective custom offsets are easily available for the 2010 Toyota Tacoma. You can scale down the offset by mounting a spacer, which squeezes the wheel outside further from the hub. This is ideal if you wish your vehicle to have a better "stance" demeanor. If you're want to obtain a tad higher conduct out of your vehicle, you can sometimes try with a negative offset. This may bring the wheels closer to the center of the car, which can present greater driving experience. You can probably as well switch the stock wheels offset in 2010 Toyota Tacoma by restyling the breadth of your tires. A bigger wheel will probably have a additional positive offset, while a narrower wheel will have a much more negative offset.

What's the suitable offset for my 2010 Toyota Tacoma? It very much depends upon your own personal choice and also what you decide to utilize your truck for. Including as well on what your car can carry out from the creator's perspective. You can make things less vexing by utilizing our handy wheel offset chart to learn what is the superb tactic for your 2010 Toyota Tacoma Beware, that the awry offset may induce driving safety together with performance difficulties.

Toyota Tacoma bolt pattern

Toyota Tacoma Wheel Offset

Shop for Tires at Tire Rack.
Stock wheel offset 30 to 45 mm
Try Wheel Spacers
Tacoma Bolt Pattern PCD 6x139.7
See Adapters
Center bore (hub bore) 106.0 mm
Use Hub Centric Rings
Thread Diameter M12 x 1.5
Lug Nuts
Stock Rim Sizes Range 16x6.5 – 22x9.0
Custom rim sizes range 18x9.0 – 18x9.0
Custom Wheels

2010 Toyota Tacoma Custom Wheel Offsets

Rim size Offset
18x9.0 -

2010 Toyota Tacoma specs

Lug pattern PCD 6x139.7
Tire size 215/70 R15 - 285/35 R22
Custom Offset mm