2016 Honda Civic Center Bore
Quick specs
The 2016 Honda Civic uses a 64.1 mm center bore across the supplied 1.5 VTEC, 2.0 i-VTEC, and 1.8i configurations. The listed factory wheel setups range from 6.5x16 to 8x18, but the hub bore remains 64.1 mm.
A wheel with a bore larger than 64.1 mm may require a hub-centric ring to fill the gap between the wheel and hub. The ring’s outer diameter must match the wheel bore, while its inner diameter must match the Civic’s 64.1 mm hub. A smaller wheel bore cannot be installed, and the 5x114.3 bolt pattern alone does not confirm compatibility.
Find your hub-centric ring
Vehicle hub alone is not enough for an exact ring. Enter the aftermarket wheel center bore.
Vehicle hub: 64.1 mm
Enter a wheel center bore to see exact ring dimensions and matching products.
More specs for the 2016 Honda Civic
Frequently asked questions
What is the center bore of a 2016 Honda Civic?
The 2016 Honda Civic has a 64.1 mm center bore. The supplied configurations, including the 1.5 VTEC, 2.0 i-VTEC, and 1.8i versions, all list the same 64.1 mm bore.
Did the center bore change between 2016 Honda Civic configurations?
No center-bore change is documented within the supplied 2016 Honda Civic configurations. Each listed configuration uses a 64.1 mm center bore.
When might a hub-centric ring be needed on a 2016 Honda Civic?
A wheel with a bore larger than 64.1 mm may leave a gap around the hub. A hub-centric ring can fill that gap when its dimensions match the wheel bore and the 64.1 mm vehicle hub. The required ring outer diameter cannot be determined without the wheel's bore measurement.
Can a wheel with a different center bore fit a 2016 Honda Civic?
A wheel whose center bore is smaller than the Civic's 64.1 mm hub cannot be installed. A larger wheel bore may be usable with a correctly sized hub-centric ring, but the supplied facts do not confirm a specific wheel without its bore measurement.
Does the 5x114.3 bolt pattern confirm wheel fitment?
The Civic's bolt pattern is 5x114.3, and its center bore is 64.1 mm. Matching the 5x114.3 bolt pattern does not by itself confirm wheel compatibility; the wheel bore and other fitment dimensions must also be checked.
A hub-centric ring fills the gap when the wheel bore is larger than this hub. A wheel whose center bore is smaller than the vehicle hub cannot be installed.