2010 Honda Accord Wheel Offset

Quick specs

Wheel size: Multiple — see configurations
Offset: ET55 · ET50 · ET45
Backspacing: Multiple — see configurations
Bolt pattern: 5×114.3
Center bore: 64.1 mm
Thread: M12×1.5
Tire size: Multiple — see configurations

OEM configurations

Configuration	Front	Rear	Offset	Backspacing	Tire	Bolt pattern	Center bore	Thread
2.4i · 2.4L, I4, Petrol	7.5x17	—	ET55	5.92 in	225/50R17	5x114.3	64.1 mm	M12 x 1.5
2.4i · 2.4L, I4, Petrol	7.5x18	—	ET55	5.92 in	235/45R18	5x114.3	64.1 mm	M12 x 1.5
2.4i · 2.4L, I4, Petrol	8x18	—	ET55	6.17 in	235/45R18	5x114.3	64.1 mm	M12 x 1.5
2.4i · 2.4L, I4, Petrol	8x19	—	ET55	6.17 in	245/40R19	5x114.3	64.1 mm	M12 x 1.5
2.4i · 2.4L, I4, Petrol	6.5x16	—	ET50	5.22 in	215/60R16	5x114.3	64.1 mm	M12 x 1.5
3.5i · 3.5L, V6, Petrol	7.5x17	—	ET55	5.92 in	225/50R17	5x114.3	64.1 mm	M12 x 1.5
3.5i · 3.5L, V6, Petrol	8x18	—	ET55	6.17 in	235/45R18	5x114.3	64.1 mm	M12 x 1.5
3.5i · 3.5L, V6, Petrol	8x19	—	ET55	6.17 in	245/40R19	5x114.3	64.1 mm	M12 x 1.5
2.0i · 2.0L, R20A3, I4, Petrol	6.5x16	6.5x17	ET55	5.42 in	205/60R16 / 205/55R17	5x114.3	64.1 mm	M12 x 1.5
2.0i · 2.0L, R20A3, I4, Petrol	7.5x17	6.5x17	ET55	5.92 in	225/50R17 / 205/55R17	5x114.3	64.1 mm	M12 x 1.5
2.0i · 2.0L, R20A3, I4, Petrol	7x18	6.5x17	ET50 / ET55	5.47 in	215/45R18 / 205/55R17	5x114.3	64.1 mm	M12 x 1.5
2.0i · 2.0L, R20A3, I4, Petrol	7.5x19	6.5x17	ET50 / ET55	5.72 in	225/40R19 / 205/55R17	5x114.3	64.1 mm	M12 x 1.5
2.2 i-DTEC · I4, Diesel	6.5x16	7.5x18	ET55	5.42 in	215/60R16 / 225/45R18	5x114.3	64.1 mm	M12 x 1.5
2.2 i-DTEC · I4, Diesel	7.5x17	7.5x18	ET55	5.92 in	225/50R17 / 225/45R18	5x114.3	64.1 mm	M12 x 1.5
2.2 i-DTEC · I4, Diesel	8x19	7.5x18	ET45 / ET55	5.77 in	225/40R19 / 225/45R18	5x114.3	64.1 mm	M12 x 1.5
2.4i · 2.4L, K24Z3, I4, Petrol	7.5x17	7.5x18	ET55	5.92 in	225/50R17 / 225/45R18	5x114.3	64.1 mm	M12 x 1.5
2.4i · 2.4L, K24Z3, I4, Petrol	8x18	7.5x18	ET55	6.17 in	235/45R18 / 225/45R18	5x114.3	64.1 mm	M12 x 1.5
2.4i (DBA-CU2) · I4, Petrol	7.5x17	7.5x18	ET55	5.92 in	225/50R17 / 225/45R18	5x114.3	64.1 mm	M12 x 1.5
2.4i (DBA-CU2) · I4, Petrol	8x18	7.5x18	ET55	6.17 in	235/45R18 / 225/45R18	5x114.3	64.1 mm	M12 x 1.5
2.4i (DBA-CU2) · I4, Petrol	7.5x19	7.5x18	ET50 / ET55	5.72 in	225/40R19 / 225/45R18	5x114.3	64.1 mm	M12 x 1.5
2.4i (DBA-CW2) · I4, Petrol	7.5x17	7.5x18	ET55	5.92 in	225/50R17 / 225/45R18	5x114.3	64.1 mm	M12 x 1.5
2.4i (DBA-CW2) · I4, Petrol	8x18	7.5x18	ET55	6.17 in	235/45R18 / 225/45R18	5x114.3	64.1 mm	M12 x 1.5
2.4i (DBA-CW2) · I4, Petrol	7.5x19	7.5x18	ET50 / ET55	5.72 in	225/40R19 / 225/45R18	5x114.3	64.1 mm	M12 x 1.5
2.4i · I4, Petrol	6.5x16	—	ET50	5.22 in	215/60R16	5x114.3	64.1 mm	M12 x 1.5
2.4i · I4, Petrol	7.5x17	—	ET55	5.92 in	225/50R17	5x114.3	64.1 mm	M12 x 1.5
2.4i · I4, Petrol	7.5x18	—	ET55	5.92 in	235/45R18	5x114.3	64.1 mm	M12 x 1.5
2.4i · I4, Petrol	8x19	—	ET55	6.17 in	245/40R19	5x114.3	64.1 mm	M12 x 1.5
3.5i · V6, Petrol	7.5x17	—	ET55	5.92 in	225/50R17	5x114.3	64.1 mm	M12 x 1.5
3.5i · V6, Petrol	8x18	—	ET55	6.17 in	235/45R18	5x114.3	64.1 mm	M12 x 1.5
3.5i · V6, Petrol	8x19	—	ET55	6.17 in	245/40R19	5x114.3	64.1 mm	M12 x 1.5

Wheels and hardware

Lug hardware

Wheel locks

Real-World 2010 Honda Accord Wheel Setups

Observed aftermarket setups from documented Modified1 builds. These are individual build records — not OEM specifications and not clearance guarantees for every vehicle.

Common custom wheel sizes

Among builds in our database for this model year:

20-inch — 18 documented builds
19-inch — 2 documented builds
17-inch — 1 documented build
18-inch — 1 documented build
22-inch — 1 documented build

23 documented builds.

DiameterLayout

Staggered · 22×10 ET45 / Rear unknown

Documented on a 2010 Honda Accord build — observed custom fitment, not a universal fit guarantee.

Wheel: Vossen CV3

Front: 22×10 ET45
Rear: —

Compared with OEM

Compared with the 19×7.5 ET50 OEM configuration. Calculated geometry only — not fit confirmation.

Outer edge 36.8 mm farther toward fender (more outward poke)
Inner edge 26.8 mm closer to suspension (less inner clearance)
Width +2.5" vs OEM
Diameter +3" vs OEM

View full build on Modified1

Staggered · 20×10.5 ET45 / Rear unknown

Documented on a 2010 Honda Accord build — observed custom fitment, not a universal fit guarantee.

Wheel: Concave CV7

Front: 20×10.5 ET45
Rear: —

Compared with OEM

Compared with the 19×7.5 ET50 OEM configuration. Calculated geometry only — not fit confirmation.

Outer edge 43.1 mm farther toward fender (more outward poke)
Inner edge 33.1 mm closer to suspension (less inner clearance)
Width +3" vs OEM
Diameter +1" vs OEM

View full build on Modified1

Staggered · 18×8 ET40 / Rear unknown

Documented on a 2010 Honda Accord build — observed custom fitment, not a universal fit guarantee.

Wheel: Enkei EKM3

Front: 18×8 ET40
Rear: —

Compared with OEM

Compared with the 18×7 ET50 OEM configuration. Calculated geometry only — not fit confirmation.

Outer edge 22.7 mm farther toward fender (more outward poke)
Inner edge 2.7 mm closer to suspension (less inner clearance)
Width +1" vs OEM

View full build on Modified1

19×8 ET32

Documented on a 2010 Honda Accord build — observed custom fitment, not a universal fit guarantee.

Compared with OEM

Compared with the 19×7.5 ET50 OEM configuration. Calculated geometry only — not fit confirmation.

Outer edge 24.3 mm farther toward fender (more outward poke)
Inner edge 11.7 mm farther from suspension (more inner clearance)
Width +0.5" vs OEM

View full build on Modified1

Staggered · 20×8.5 ET35 / Rear unknown

Documented on a 2010 Honda Accord build — observed custom fitment, not a universal fit guarantee.

Wheel: Giovanna Meccas

Front: 20×8.5 ET35 · 245/35R20
Rear: —

Compared with OEM

Compared with the 19×7.5 ET50 OEM configuration. Calculated geometry only — not fit confirmation.

Outer edge 27.7 mm farther toward fender (more outward poke)
Inner edge 2.3 mm farther from suspension (more inner clearance)
Width +1" vs OEM
Diameter +1" vs OEM

View full build on Modified1

Staggered · 17×? / Rear unknown

Documented on a 2010 Honda Accord build — observed custom fitment, not a universal fit guarantee.

Wheel: Enkei

Front: 17×? · 225/50R17
Rear: —

Compared with OEM

Compared with the 17×7.5 ET55 OEM configuration. Calculated geometry only — not fit confirmation.

View full build on Modified1

Staggered · 20×? / Rear unknown

Documented on a 2010 Honda Accord build — observed custom fitment, not a universal fit guarantee.

Wheel: 2Crave No.02

Front: 20×?
Rear: —

Compared with OEM

Compared with the 19×7.5 ET50 OEM configuration. Calculated geometry only — not fit confirmation.

Diameter +1" vs OEM

View full build on Modified1

Staggered · 20×? / Rear unknown

Documented on a 2010 Honda Accord build — observed custom fitment, not a universal fit guarantee.

Wheel: Vossen CV3-R

Front: 20×?
Rear: —

Compared with OEM

Compared with the 19×7.5 ET50 OEM configuration. Calculated geometry only — not fit confirmation.

Diameter +1" vs OEM

View full build on Modified1

Staggered · 20×? / Rear unknown

Documented on a 2010 Honda Accord build — observed custom fitment, not a universal fit guarantee.

Wheel: Giovanna Monza

Front: 20×?
Rear: —

Compared with OEM

Compared with the 19×7.5 ET50 OEM configuration. Calculated geometry only — not fit confirmation.

Diameter +1" vs OEM

View full build on Modified1

Staggered · 20×? / Rear unknown

Documented on a 2010 Honda Accord build — observed custom fitment, not a universal fit guarantee.

Wheel: Giovanna Martuni

Front: 20×?
Rear: —

Compared with OEM

Compared with the 19×7.5 ET50 OEM configuration. Calculated geometry only — not fit confirmation.

Diameter +1" vs OEM

View full build on Modified1

Staggered · 20×? / Rear unknown

Documented on a 2010 Honda Accord build — observed custom fitment, not a universal fit guarantee.

Wheel: Enkei AKP

Front: 20×?
Rear: —

Compared with OEM

Compared with the 19×7.5 ET50 OEM configuration. Calculated geometry only — not fit confirmation.

Diameter +1" vs OEM

View full build on Modified1

Staggered · 20×8.5 / Rear unknown

Documented on a 2010 Honda Accord build — observed custom fitment, not a universal fit guarantee.

Wheel: Vossen

Front: 20×8.5
Rear: —

Compared with OEM

Compared with the 19×7.5 ET50 OEM configuration. Calculated geometry only — not fit confirmation.

Diameter +1" vs OEM

View full build on Modified1

Compare your own setup

See how a different width or offset sits versus an OEM configuration for this year.

OEM baseline

Open full fitment calculator

More specs for the 2010 Honda Accord

Each OEM row is a catalog configuration. Offset ranges are not collapsed when the database has exact setups. Documented aftermarket builds are observed setups only — not universal fit or clearance confirmation.