2001 Kia Rio Wheel Backspacing
4.07 in · 4.32 in
Quick specs
OEM configurations
| Configuration | Rim | Offset | Backspacing | Tire | Bolt pattern | Center bore | Thread |
|---|---|---|---|---|---|---|---|
| 1.5i · 1.5L, A5D, I4, Petrol | 5x13 | ET40 | 4.07 in | 175/70R13 | 4x100 | 54.1 mm | M12 x 1.5 |
| 1.5i · 1.5L, A5D, I4, Petrol | 5.5x14 | ET40 | 4.32 in | 175/65R14 | 4x100 | 54.1 mm | M12 x 1.5 |
| 1.5i · 1.5L, A5D, I4, Petrol | 5.5x14 | ET40 | 4.32 in | 175/65R14 | 4x100 | 54.1 mm | M12 x 1.5 |
| 1.5i · 1.5L, A5D, I4, Petrol | 5.5x13 | ET40 | 4.32 in | 175/70R13 | 4x100 | 54.1 mm | M12 x 1.5 |
| 1.3i · 1.3L, A3E, I4, Petrol | 5.5x13 | ET40 | 4.32 in | 175/70R13 | 4x100 | 54.1 mm | M12 x 1.5 |
| 1.3i · 1.3L, A3E, I4, Petrol | 5x13 | ET40 | 4.07 in | 155/80R13 | 4x100 | 54.1 mm | M12 x 1.5 |
| 1.3i · 1.3L, A3E, I4, Petrol | 5.5x14 | ET40 | 4.32 in | 175/65R14 | 4x100 | 54.1 mm | M12 x 1.5 |
| 1.3i · 1.3L, A3E, I4, Petrol | 5.5x13 | ET40 | 4.32 in | 175/70R13 | 4x100 | 54.1 mm | M12 x 1.5 |
| 1.3i · 1.3L, A3E, I4, Petrol | 5.5x14 | ET40 | 4.32 in | 175/65R14 | 4x100 | 54.1 mm | M12 x 1.5 |
| 1.5i · 1.5L, A5E, I4, Petrol | 5.5x13 | ET40 | 4.32 in | 175/70R13 | 4x100 | 54.1 mm | M12 x 1.5 |
| 1.5i · 1.5L, A5E, I4, Petrol | 5x13 | ET40 | 4.07 in | 155/80R13 | 4x100 | 54.1 mm | M12 x 1.5 |
| 1.5i · 1.5L, A5E, I4, Petrol | 5.5x14 | ET40 | 4.32 in | 175/65R14 | 4x100 | 54.1 mm | M12 x 1.5 |
Compare wheel position See wheel offset
Backspacing values above are calculated from OEM wheel width and offset using BS = width/2 + offset_mm/25.4 (same formula as the fitment calculator).
Related tools
More on Amazon
LEXIVON 1/2-Inch Drive Click Torque Wrench 25-250 Ft-Lb/33.9-338.9 Nm (LX-184)
Related tool — not a vehicle-fit product.
Check price on Amazon
Wheeler Manual Firearms Accurizing Torque Wrench with Inch/Pounds Measurement, Bits and Storage Case for Scope Mounting, Gunsmithing and Maintenance
Related tool — not a vehicle-fit product.
Check price on Amazon
More specs for the 2001 Kia Rio
Backspacing on these pages is calculated from OEM wheel width and offset (width/2 + offset_mm/25.4). Higher backspacing seats the wheel farther inward; lower backspacing moves it outward.