2006 Mitsubishi Lancer Evolution Wheel Offset

Quick specs

Wheel size
8x17 · 8x18 · 8.5x18 · 6x15
Offset
ET38 · ET46
Backspacing
5.50 in · 5.75 in · 4.81 in
Bolt pattern
5×114.3
Center bore
67.1 mm
Thread
M12×1.5, M12×1.25
Tire size
Multiple — see configurations

The 2006 Mitsubishi Lancer Evolution has several listed OEM wheel configurations, including 8x17 ET38 with 235/45R17 tires, 8x18 ET38 with 235/40R18 tires, and 8.5x18 ET38 with 245/40R18 tires. The OEM data also lists 6x15, ET46, and multiple backspacing values, so the exact catalog configuration matters rather than assuming one specification applies to every version.

The fitment data shows a 5x114.3 bolt pattern, 67.1 mm center bore, and five lug nuts. There are 180 documented custom builds, most commonly using 18-inch wheels, but those observed setups are not universal fit or clearance confirmation.

OEM configurations

ConfigurationRimOffsetBackspacingTireBolt patternCenter boreThread
2.0T · 4G63, I4, Petrol8x17ET385.50 in235/45R175x114.367.1 mmM12 x 1.5
2.0T · 4G63, I4, Petrol8x18ET385.50 in235/40R185x114.367.1 mmM12 x 1.5
2.0T · 4G63, I4, Petrol8.5x18ET385.75 in245/40R185x114.367.1 mmM12 x 1.5
2.0T · 2.0L, 4G63T, I4, Petrol8x17ET385.50 in235/45R175x114.367.1 mmM12 x 1.5
2.0T · 2.0L, 4G63T, I4, Petrol8x18ET385.50 in235/40R185x114.367.1 mmM12 x 1.5
2.0T · 2.0L, 4G63T, I4, Petrol8.5x18ET385.75 in245/40R185x114.367.1 mmM12 x 1.5
2.0T · 2.0L, 4G63T, I4, Petrol8x17ET385.50 in235/45R175x114.367.1 mmM12 x 1.5
2.0T · 2.0L, 4G63T, I4, Petrol8x18ET385.50 in235/40R185x114.367.1 mmM12 x 1.5
2.0T · 2.0L, 4G63T, I4, Petrol8.5x18ET385.75 in245/40R185x114.367.1 mmM12 x 1.5
2.0T GSR (GH-CT9A) · 4G63, I4, Petrol8x17ET385.50 in235/45R175x114.367.1 mmM12 x 1.5
2.0T GSR (GH-CT9A) · 4G63, I4, Petrol8x18ET385.50 in235/40R185x114.367.1 mmM12 x 1.5
2.0T GSR (GH-CT9A) · 4G63, I4, Petrol8.5x18ET385.75 in245/40R185x114.367.1 mmM12 x 1.5
2.0T GT (GH-CT9A) · 4G93, I4, Petrol8x17ET385.50 in235/45R175x114.367.1 mmM12 x 1.5
2.0T GT (GH-CT9A) · 4G93, I4, Petrol8x17ET385.50 in235/40R175x114.367.1 mmM12 x 1.5
2.0T GT (GH-CT9A) · 4G93, I4, Petrol8.5x18ET385.75 in245/40R185x114.367.1 mmM12 x 1.5
2.0T GT (GH-CT9W) · 4G63, I4, Petrol8x17ET385.50 in235/45R175x114.367.1 mmM12 x 1.5
2.0T GT (GH-CT9W) · 4G63, I4, Petrol8x18ET385.50 in235/40R185x114.367.1 mmM12 x 1.5
2.0T GT (GH-CT9W) · 4G63, I4, Petrol8.5x18ET385.75 in245/40R185x114.367.1 mmM12 x 1.5
2.0T GT-A (GH-CT9W) · 4G63, I4, Petrol8x17ET385.50 in235/45R175x114.367.1 mmM12 x 1.25
2.0T GT-A (GH-CT9W) · 4G63, I4, Petrol8x18ET385.50 in235/40R185x114.367.1 mmM12 x 1.25
2.0T GT-A (GH-CT9W) · 4G63, I4, Petrol8.5x18ET385.75 in245/40R185x114.367.1 mmM12 x 1.25
2.0T RS (GH-CT9A) · 4G63, I4, Petrol6x15ET464.81 in205/65R155x114.367.1 mmM12 x 1.5
2.0T RS (GH-CT9A) · 4G63, I4, Petrol8x17ET385.50 in235/45R175x114.367.1 mmM12 x 1.5
2.0T RS (GH-CT9A) · 4G63, I4, Petrol8x18ET385.50 in235/40R185x114.367.1 mmM12 x 1.5

Wheels and hardware

More on Amazon

Lug hardware

More on Amazon
  • White Knight Chrome M12x1.50 Bulge Acorn Lug Nut, 20 Count

    M12 x 1.5

    Matches M12 x 1.5 thread — confirm wheel seat style

    Check price on Amazon
  • White Knight 3807BK-20AM Black Chrome M12x1.50 Spline Lug Nut, 20 items

    M12 x 1.5

    Matches M12 x 1.5 thread — confirm wheel seat style

    Check price on Amazon

Wheel locks

More on Amazon
  • MCGARD Chrome Cone Seat M12 x 1.5 Wheel Locks

    M12 x 1.5 · lock

    Matches M12 x 1.5 — confirm seat style for your wheel

    Check price on Amazon
  • Gorilla Automotive Wheel Locks With Washer (M12x1.50)

    M12 x 1.5 · lock

    Matches M12 x 1.5 — confirm seat style for your wheel

    Check price on Amazon

Real-World 2006 Mitsubishi Lancer Evolution Wheel Setups

Observed aftermarket setups from documented Modified1 builds. These are individual build records — not OEM specifications and not clearance guarantees for every vehicle.

Common custom wheel sizes

Among builds in our database for this model year:

  • 18-inch — 145 documented builds
  • 17-inch — 31 documented builds
  • 19-inch — 4 documented builds

Showing 36 of 180 documented builds in this view.

2006 Mitsubishi Lancer Evolution custom wheel setup

Staggered · 18×9.5 ET15 / Rear unknown

Documented on a 2006 Mitsubishi Lancer Evolution build — observed custom fitment, not a universal fit guarantee.

Wheel: Enkei RPF1

Front
18×9.5 ET15 · 245/40R18
Rear
Compared with OEM

Compared with the 18×8 ET38 OEM configuration. Calculated geometry only — not fit confirmation.

  • Outer edge 42 mm farther toward fender (more outward poke)
  • Inner edge 4 mm farther from suspension (more inner clearance)
  • Width +1.5" vs OEM
2006 Mitsubishi Lancer Evolution custom wheel setup

Staggered · 17×9.5 ET28 / Rear unknown

Documented on a 2006 Mitsubishi Lancer Evolution build — observed custom fitment, not a universal fit guarantee.

Wheel: Volk CE28

Front
17×9.5 ET28 · 255/40R17
Rear
Compared with OEM

Compared with the 17×8 ET38 OEM configuration. Calculated geometry only — not fit confirmation.

  • Outer edge 29 mm farther toward fender (more outward poke)
  • Inner edge 9 mm closer to suspension (less inner clearance)
  • Width +1.5" vs OEM
2006 Mitsubishi Lancer Evolution custom wheel setup

Staggered · 18×9.5 ET15 / 18×9.5 ET15

Documented on a 2006 Mitsubishi Lancer Evolution build — observed custom fitment, not a universal fit guarantee.

Wheel: Battle MB

Front
18×9.5 ET15 · 235/40R18
Rear
18×9.5 ET15
Compared with OEM

Compared with the 18×8 ET38 OEM configuration. Calculated geometry only — not fit confirmation.

  • Outer edge 42 mm farther toward fender (more outward poke)
  • Inner edge 4 mm farther from suspension (more inner clearance)
  • Width +1.5" vs OEM
2006 Mitsubishi Lancer Evolution custom wheel setup

Staggered · 18×9 ET5 / Rear unknown

Documented on a 2006 Mitsubishi Lancer Evolution build — observed custom fitment, not a universal fit guarantee.

Wheel: BBS LM

Front
18×9 ET5 · 215/35R18
Rear
Compared with OEM

Compared with the 18×8 ET38 OEM configuration. Calculated geometry only — not fit confirmation.

  • Outer edge 45.7 mm farther toward fender (more outward poke)
  • Inner edge 20.3 mm farther from suspension (more inner clearance)
  • Width +1" vs OEM
2006 Mitsubishi Lancer Evolution custom wheel setup

Staggered · 18×9.5 ET28 / Rear unknown

Documented on a 2006 Mitsubishi Lancer Evolution build — observed custom fitment, not a universal fit guarantee.

Wheel: Volk CE28N

Front
18×9.5 ET28 · 265/35R18
Rear
Compared with OEM

Compared with the 18×8 ET38 OEM configuration. Calculated geometry only — not fit confirmation.

  • Outer edge 29 mm farther toward fender (more outward poke)
  • Inner edge 9 mm closer to suspension (less inner clearance)
  • Width +1.5" vs OEM
2006 Mitsubishi Lancer Evolution custom wheel setup

Staggered · 17×10 ET15 / Rear unknown

Documented on a 2006 Mitsubishi Lancer Evolution build — observed custom fitment, not a universal fit guarantee.

Wheel: bbs rs

Front
17×10 ET15 · 245/40R17
Rear
Compared with OEM

Compared with the 17×8 ET38 OEM configuration. Calculated geometry only — not fit confirmation.

  • Outer edge 48.4 mm farther toward fender (more outward poke)
  • Inner edge 2.4 mm closer to suspension (less inner clearance)
  • Width +2" vs OEM
2006 Mitsubishi Lancer Evolution custom wheel setup

Staggered · 18×9.5 ET22 / Rear unknown

Documented on a 2006 Mitsubishi Lancer Evolution build — observed custom fitment, not a universal fit guarantee.

Wheel: Rays Volk TE37SL

Front
18×9.5 ET22 · 235/40R18
Rear
Compared with OEM

Compared with the 18×8 ET38 OEM configuration. Calculated geometry only — not fit confirmation.

  • Outer edge 35 mm farther toward fender (more outward poke)
  • Inner edge 3 mm closer to suspension (less inner clearance)
  • Width +1.5" vs OEM
2006 Mitsubishi Lancer Evolution custom wheel setup

Staggered · 18×9.5 ET15 / Rear unknown

Documented on a 2006 Mitsubishi Lancer Evolution build — observed custom fitment, not a universal fit guarantee.

Wheel: Enkei RPF1

Front
18×9.5 ET15 · 255/35R18
Rear
Compared with OEM

Compared with the 18×8 ET38 OEM configuration. Calculated geometry only — not fit confirmation.

  • Outer edge 42 mm farther toward fender (more outward poke)
  • Inner edge 4 mm farther from suspension (more inner clearance)
  • Width +1.5" vs OEM
2006 Mitsubishi Lancer Evolution custom wheel setup

Staggered · 18×9 ET35 / Rear unknown

Documented on a 2006 Mitsubishi Lancer Evolution build — observed custom fitment, not a universal fit guarantee.

Wheel: Advan Racing RSII

Front
18×9 ET35 · 245/40R18
Rear
Compared with OEM

Compared with the 18×8 ET38 OEM configuration. Calculated geometry only — not fit confirmation.

  • Outer edge 15.7 mm farther toward fender (more outward poke)
  • Inner edge 9.7 mm closer to suspension (less inner clearance)
  • Width +1" vs OEM
2006 Mitsubishi Lancer Evolution custom wheel setup

Staggered · 17×9 ET29 / Rear unknown

Documented on a 2006 Mitsubishi Lancer Evolution build — observed custom fitment, not a universal fit guarantee.

Wheel: Advan RS

Front
17×9 ET29
Rear
Compared with OEM

Compared with the 17×8 ET38 OEM configuration. Calculated geometry only — not fit confirmation.

  • Outer edge 21.7 mm farther toward fender (more outward poke)
  • Inner edge 3.7 mm closer to suspension (less inner clearance)
  • Width +1" vs OEM
2006 Mitsubishi Lancer Evolution custom wheel setup

Staggered · 19×9 ET29 / Rear unknown

Documented on a 2006 Mitsubishi Lancer Evolution build — observed custom fitment, not a universal fit guarantee.

Wheel: Advan RS

Front
19×9 ET29 · 245/35R19
Rear
Compared with OEM

Compared with the 18×8 ET38 OEM configuration. Calculated geometry only — not fit confirmation.

  • Outer edge 21.7 mm farther toward fender (more outward poke)
  • Inner edge 3.7 mm closer to suspension (less inner clearance)
  • Width +1" vs OEM
  • Diameter +1" vs OEM
2006 Mitsubishi Lancer Evolution custom wheel setup

Staggered · 18×9.5 ET20 / Rear unknown

Documented on a 2006 Mitsubishi Lancer Evolution build — observed custom fitment, not a universal fit guarantee.

Wheel: Rota Grids

Front
18×9.5 ET20 · 225/40R18
Rear
Compared with OEM

Compared with the 18×8 ET38 OEM configuration. Calculated geometry only — not fit confirmation.

  • Outer edge 37 mm farther toward fender (more outward poke)
  • Inner edge 1 mm closer to suspension (less inner clearance)
  • Width +1.5" vs OEM

Compare your own setup

See how a different width or offset sits versus an OEM configuration for this year.

Open full fitment calculator

More specs for the 2006 Mitsubishi Lancer Evolution

Frequently asked questions

What are the OEM wheel sizes and tire pairings for the 2006 Mitsubishi Lancer Evolution?

The supplied OEM configurations include 8x17 ET38 with 235/45R17 tires, 8x18 ET38 with 235/40R18 tires, and 8.5x18 ET38 with 245/40R18 tires. The allowed OEM data also lists 6x15 and 205/65R15, but an exact configuration pairing is not provided here.

What is the OEM offset and backspacing?

ET38 is shown for the 8x17, 8x18, and 8.5x18 OEM configurations. The broader OEM data also lists ET46, plus backspacing values of 5.50, 5.75, and 4.81 inches. The source does not map every offset and backspacing value to a specific wheel row.

Does the 2006 Mitsubishi Lancer Evolution have a staggered OEM setup?

The catalog configurations shown are not staggered: the same front and rear wheel specification is used within each listed setup. The custom-fitment data includes 36 documented staggered builds, but those are observed setups rather than universal confirmation.

What are the bolt pattern, center bore, and lug details?

The bolt pattern is 5x114.3, also written as 5x4.5, with five lugs. The center bore is 67.1 mm, and the listed thread specification is M12 x 1.5 with lug nuts.

What custom wheel sizes have been documented?

The database contains 180 documented custom builds. The most common documented diameter is 18 inches with 145 builds, followed by 17 inches with 31 and 19 inches with 4. Documented custom examples include 18x9.5 ET15 with 245/40R18 tires and 17x9.5 ET28 with 255/40R17 tires. These examples do not confirm universal fit or clearance.

Does the 5x114.3 bolt pattern guarantee wheel fitment?

No. Matching 5x114.3 does not by itself confirm wheel compatibility. The center bore must also be considered; a wheel with a center bore smaller than the vehicle hub cannot be installed. The documented custom builds are evidence for those specific builds only.

Each OEM row is a catalog configuration. Offset ranges are not collapsed when the database has exact setups. Documented aftermarket builds are observed setups only — not universal fit or clearance confirmation.